Yokomo Drift Spec BL-PRO4 Brushless ESC/Motor Combo Set (10.5T)
This is the Yokomo Drift Spec BL-PRO4 Brushless ESC and Drift Spec ZERO2 Brushless Motor Combo Set. This combo is applicable with RWD and 4WD Drifters. This speed controller comes installed with a program dedicated to drift. In order to make it easy to control the drift-angle during cornering, set the throttle characteristics in the low speed range to mild and increase the boost from the medium speed range. This produces powerful turning and turning-back. While maintaining the ease of handling, it makes it possible for anyone to have powerful drifts.
Changing the program settings can be done with the Yokomo Brushless Programmer (YOKBL-YBP4), sold separately. The ESC can also be remotely programmed using the smartphone application and Yokomo WiFi Module (YOKBL-WM).
NOTE: This Yokomo Drift Spec ESC/Motor combo is available with either a 10.5T (YOKBL-P4105D) or the a 13.5T Motor (YOKBL-R4135D). It is recommend to use the 10.5T with high grip surfaces (asphalt, carpet) and use the 13.5T motor for low grip surfaces (concrete, p-tile).
Motor Type: Sensored/4-Pole Sensored Brushless
Motor Limit: >3.5T (Specification when using the fan)
Operating Voltage: 3.7-7.4V
Full Aluminum Case/Heatsink: Yes
Typ. Voltage Drop @20A per Phase: 0.0095V
Rated Current per Phase: 828A
Plugged 30x30x10mm Fan: Yes
BEC Output: 6V/7.4V Built-in DC Booster, Continuous Current of 3A
BEC Output Short Protection: Yes
"Boost 0" Mode: Yes
Multi-frequency System: Yes
Power Wires: 12awg
Case Size: 32.9x34.6x21mm (without fan)
Weight: 50g (without cable and fan)
This product was added to our catalog on February 8, 2018