XGuard RC XGlow Pro Glow Igniter

The XGuard RC XGlow Pro Glow Igniter is a highly advanced glow igniter, packed with features that includes the standard glow igniter function, but adds additional functions like good-bad glow plug sensor, a wide voltage range of 4V-10V providing constant glow-plug current at any voltage level, model locator buzzing horn controlled by a radio switch, voltage monitor with LED lights and emergency Buzzing Horn when critically low.

Additional functionally is available when purchasing optional connection packages that include anti-chicken dance, and anti-hot start. See below for additional features, and parts requirement.

Normal Standard Functions:

• Both Push ON Switch and Radio Switch
• Audio feedback warns when glow plug is defective
• A three position switch can be used for 1) OFF 2) Locator Buzzer and 3) Glow Plug On

Built-in Additional Functions (if you want to use them):

• If throttle connected to port 1 Bottom it won’t start when open (No hot starts)
• Requires: AAVXG0203
• If RPM sensor connected it will monitor RPM and throttle and will stop a runaway engine when it sees RPM while throttle is disconnected (Chicken Dance prevention)
• Requires: AAVXG0202

Notes: 

Adjustable output levels: For use with Enya plugs and thicker elements 
Advanced sensor: Automatic heat adjustment in the event of a fuel soaked plug