This is the WingTOTE Small Double Tote Wing Bag.
- Dimensions:42"-L x 22"-R x 14"-Tip
- Double Totes are designed for RC Planes with 2 separate wing panels. In the center is a layer 3/8-inch foam enclosed in fleece and uses Velcro to secure it to the bottom so its stays in place. The center piece separates the two wings.
- On the front of the tote is a pocket for your joiner tube that's large enough to easily insert and remove the tube. A pocket has been added to each bag to hold a spare prop.
- Made with Red & Black 600 Denier Nylon that is extremely durable and water resistant and looks great!
- The inside is lined with heavy fleece to protect the delicate wing covering in transportation and storage.
- Between the Nylon and the fleece is a layer of 3/8" closed cell foam to help protect the wing from dings and dents.
- Strong hooks on three sides so you can hang the bag vertically or horizontally.
- Shoulder straps are spaced wide and at an angle to make the bag balance perfectly on your shoulder. The handles have been redesigned with the addition of another horizontal web strap that makes it easier to carry the bag.
- The bottom of the bags are lined with 1-1/2" webbing to protect the outside of the bag from excessive wear and to keep your bag looking great.
- The high quality zippers go around three sides so the wing can be inserted easily, but do not carry all the way around the bag, helping to prevent the wing from sliding out if you forget to zip the bag up.