The Venom Pro Quad 100W 7A 4-Port AC/DC Battery Charger is the ultimate solution for hobbyists looking to charge multiple packs quickly and conveniently. Featuring a vertical stance, this charger saves valuable space by providing four complete charging circuits, each with its own dedicated 100W integrated power supply in a footprint similar to most single output chargers.
Having four dedicated power supplies in one compact package means all four channels are able to receive 100W of power, ensuring you are not diluting your amp rate when charging two, three, or four packs simultaneously. Discreetly located on the back of the charger are two powerful USB 2.3 Amp charging ports to power your USB devices.
Menu navigation is made easy with a five-button control interface and brightly backlit LCD screen. All the most common battery chemistries are supported including LiPo, LiHV, LiFe, Li-Ion, NiMH, NiCD, and Pb (lead acid) with a complete assortment of charge leads included in the box along with extra long balance leads to make safe charging in a LiPo sack effortless.
Specifications:
Included Charge Leads: Alligator, Deans, EC3, EC5, HXT 4, JST, Receiver (RX), Tamiya, XT60
LiPo/LiHV/LiFe/Li-Ion Cell Count: 1-6 Cell
NiCd/NiMH Cell Count: 1-15 Cell
Pb Battery Voltage: 2-20V
Charge Current: 4 x 0.1 - 7.0A
Discharge Rate: 0.1 - 1.0A
Circuit Power: 4 x 100W
Current Drain Balancing: 300mAh per Cell
USB Output: 2 x 5V 2.3A USB 2.0
Input: DC 11.0V-18.0V - AC 100V-240V
Display Type: LCD
Length: 7 in (178mm)
Height: 9.25 in (235mm)
Width/Diameter: 4.25 in (108mm)
WARNING NOTE: This charger is not compatible with Traxxas iD equipped LiPo Batteries; only Traxxas iD chargers properly charge Traxxas iD LiPo Batteries. NEVER, UNDER ANY CIRCUMSTANCES, use this charger to charge a Traxxas iD equipped LiPo Battery.
This product was added to our catalog on August 5, 2016
