T-REX 700L Dominator HV Super Combo by Align w/Gpro FBL, Motor, ESC, Servos & CF Blades
This is the T-REX 700L Dominator HV Super Combo Helicopter Kit. Equipped with Alignís next generation Gpro flybarless system, 800MX 520KV motor, BL815H/BL855H brushless servos and DFC rotor head, the T-Rex 700L Dominator combines necessary upgrades with an awesome electronics package to deliver incredible 3D performance.
The 800MX 520KV Dominator motor delivers extraordinary power output. The latest BL815H and BL855H metal gear brushless servos provide superior torque and speed, with unparalleled efficiency and precision. These have been combined with numerous performance upgrades, including a DFC main rotor assembly, updated swashplate anti-rotation guide, hardened main gear, updated tail transmission, dual pivoted tail control system, metal frame reinforcement plates and more. The superior control feel, combined with its attractive look make the T-Rex 700L Dominator a top choice for demanding 3D pilots.
Align's multifunctional Gpro flybarless system with active CPU, processes 20 times faster than the previous generation. The updated software structure improves system compensation with precise and agile response, and can be updated as changes are released. The most important feature is that Gpro utilizes the latest iOS and Android app's to allow easily and direct adjustment through a mobile phone! A human oriented interface rounds out the package to allow convenient and rapid setup and installation.
- 700L Dominator
- The 700 DFC flybarless rotor head system utilizes a low CG design that reduces resistance during flight, and increases flight responsiveness and precision.
- Powered by 800MX 520KV motor engraved with DOMINATOR insignia delivers extraordinary power output.
- The latest BL815H and BL855H metal gear brushless servos are standard equipment, featuring superior torque, speed with unparalleled efficiency and precision.
- Updated frame reinforcement plates and blocks effectively improve the frameís anti-torsion ability. The improvement in frame rigidity and solidness is especially evident during extreme 3D maneuvers.
- 3K side frame plate is integrated with battery rail, combined with all in one cartridge and latching battery mounting design, and CNC aluminum alloy battery mounting plate, for simplified switching of battery packs and crash protection.
- Updated tail gearbox design, combined with dual point mounted tail pitch control assembly to minimize slop and increase rudder control precision.
- Updated vertical tail fin.
- Updated high strength cnc m1 helical main gear and tail drive bevel gear assembly, with reinforced overall gear structure and increased gear thickness improves gear's anti torsion ability to prevent gear from deforming under extreme power.
- Gpro Controller
- CPU processing 20 times faster than previous generation for precise and agile response.
- Fresh software process structure improves system compensation and keeps up-to-date flying performance.
- Utilizes latest iOS and Android APP that can be used to easily and directly adjust settings through mobile phone while flying outdoors.
- Human oriented interface allows convenient and rapid setup and installation.
- Superior flying characteristic remain the same flying control among T-REX 250~800 helicopters.
- Supports 90/120/135/140 CCPM swashplates
- Spektrum and JR Satellite receivers support (Replaces original factory receiver)
- Futaba S.BUS/JR X.BUS system support
- Supports Wide/Narrow Bandwidth Digital and brushless servos
- Compatible with 2 to 5 blades rotor heads
- Built in governor function
- Compatible with 1024/2048 resolution Spektrum receivers
- Field setup without the use of a PC
- Support up to 6 servos
- Automatic servo type recognization
- 700L Dominator
- Length: 1350mm
- Height: 360mm
- Width: 208mm
- Main Blade Length: 700mm
- Main Rotor Diameter: 1582mm
- Tail Rotor Diameter: 281mm
- Motor Drive Gear: 12T
- Main Drive Gear: 112T
- Autorotation Tail Drive Gear: 104T
- Tail Drive Gear: 22T
- Drive Gear Ratio: 1:9.33:4.37
- Weight w/Motor: 3310g
- Gpro Flybarless System
- Operating Voltage Range: DC 3.5V~8.4V
- Operating Current Consumption: <80mA @4.8V
- X and Y axis Operating Angle Range: -300~+300 degree
- Z axis Operating Angle Range: -600~+600 degree
- Sensor Resolution: 12bit
- Maximum Working Voltage: 8.5V
- Operating Temperature: -20~60 degree
- Operating Humidity: 0%~95%
- Size: 36.5x25.2x15.6mm
- Weight: 11g
- (1) T-REX 700L DOMINATOR Kit
- (1) 700 Carbon Fiber Blades
- (1) 105mm 3K Carbon Fiber Tail Blades
- (1) 800MX Brushless Motor (520KV)
- (3) BL815H High Voltage Brushless Servo
- (1) BL855H High Voltage Brushless Servo
- (1) 3K Carbon Fiber Tail Boom
- (1) Aluminum Tail Boom
- (1) Castle EDGE HV 120 Brushless ESC
- (1) Gpro Flybarless system
- 7-channel or more helicopter transmitter & receiver system
- (2) 6S Li-Po 4500 ~ 5200mAh
- (1) 2S Li-Po 1900 ~ 2300mAh
- Digital Pitch Gauge
This product was added to our catalog on June 25, 2014.