T-REX 600L Dominator Super Combo Helicopter Kit by Align w/BeastX Plus
This product was added to our catalog on March 22, 2016.
This version of the Align T-REX 600L Dominator Super Combo includes the incredible BeastX Plus Flybarless System! Additionally, this Super Combo package includes the Castle Edge HV 80 Brushless ESC, one BL855H HV Brushless Tail Servo, three BL8150 HV Brushless Cyclic servos, the 750MX 530kV Brushless Motor, as well as Carbon Fiber Main and Tail Blades to round out the package.
The Align T-Rex 600L Dominator incorporates all the top grade upgrades and the high-end Microbeast Plus flybarless system to provide the stability and power to exceed all expectations. With a superior control feel, attractive looks and Super Combo package, the T-Rex 600L Dominator is the top choice for serious enthusiasts.
The BeastX Plus flybarless system features a 6-axis gyro and 32-bit high speed processor. This processor and gyro work in harmony together to provide the pilot with exceptional flying characteristics, proven performance. Additionally, the BeastX Plus features improvements to vibration detection and absorption seen at the gyro and accelerometer level. With these improvements the BeastX can operate in harsh vibration environments and the pilot would not notice any bad tendencies or bobbles while in flight.
Powered by the Align 750MX 530kV motor, engraved with Dominator insignia, the 600L will feel the extraordinary power output right away. BL815H and BL855H metallic brushless servos control the movements as standard equipment, boasting superior torque, speed with unparalleled efficiency and precision. These servos are highly appraised by Align team pilots for their low operation heat, contributing to dramatically increased longevity.
600L Dominator Features:
- Equipped with the low CG DFC rotor head, effectively reducing wind resistance during flight, providing the most direct and precise control feel back to the pilot, and exhibits exhilarating 3D performance and unimaginable flight speed. The spindle shaft design features an oversized M5x10mm spindle screws to increase the rigidity of the overall rotor head.
- Top mounted motor base and embedded servo mounts. The latest BL815H and BL855H metallic brushless servos are standard equipment, featuring superior torque, speed with unparalleled efficiency and precision.
- Lightweight H-cross section for electronic equipment.
- Sliding battery tray rails embedded into 3K Side frame.
- Equipped with high strength CNC M1/118T helical main gear and tail drive bevel gear assembly, featuring reinforced overall gear structure and increased gear thickness, effectively improves gear's anti-torsion ability to prevent gear from deforming under extreme power, reducing gear wear and power loss.
- CNC machined aluminum pieces including servo mount.
- Updated tail control assembly with dual mounting points, effectively eliminate slop and improve control precision and feel. Highest spec and superior anti-wear material increases the overall strength and durability for torque tube drive gear, effectively minimize gear striping and crash damage.
BeastX Plus Features:
- Servo center pulses:
- Swashplate: 1520Ás
- Rudder: 1520Ás, 960Ás, 760Ás
- Servo pulse rates:
- Swashplate: 50 - 200Hz
- Rudder: 50 - 560Hz
- Swashplate mixing:
- mCCPM, eCCPM: 90, 120, 135, 140
- Swash phasing adjustment (Via BeastX USB BTXA76007 and StudioX)
- Input signals:
- Single channels
- PPM serial pulse
- SRXL (JR XBus, SUMD, M-Link)
- Futaba S.Bus/S.Bus2
- Spektrum Remote Receiver (DSM2/DSMX - with BeastX Adapter BTXA76009)
600L Dominator Specifications:
Main Blade Length: 600mm
Main Rotor Diameter: 1347mm
Tail Rotor Diameter: 260mm
Motor Pinion Gear: 14T
Main Drive Gear: 118T
Autorotation Tail Drive Gear: 131T
Tail Drive Gear: 34T
Drive Gear Ratio: 1:8.42:3.85
Weight (w/motor): 2900g
BeastX Plus Specifications:
Input Voltage: 3.5V-8.5V DC (operation with 2 cell LiPo is possible)
Processor: 32 Bit ARM
Sensor: 6-Axis MEMS (Gyro+Accelerometer)
Weight (w/o wires): 11g
750MX Motor Specifications:
Input voltage: DC11.1V-50.4V
Max continuous current: 100A/165A(5sec)
Max output power: 4400W/7260W(5sec)
KV value: 530KV
Stator Arms: 12
Magnet Poles: 10
Dimension: spindle 6x52x61.5mm
Weight: 452g (approx.)
- T-REX 600L Dominator Kit
- (1) 600 Carbon Fiber Blade Set
- (1) 95 Carbon Fiber Tail Blade Set
- (1) BeastX Plus Flybarless System
- (1) Castle EDGE HV 80 Brushless ESC
- (1) 750MX Brushless Motor (530KV)
- (3) BL815H High Voltage Brushless Servo
- (1) BL855H High Voltage Brushless Servo
Needed To Complete:
- 2.4GHz 7-Channel Helicopter Radio System
- (2) 6S LiPo Battery, 2600 ~ 4600mAh (3300mAh suggested)
- Compatible Battery Charger
- Digital Pitch Gauge / Dial Pitch Gauge