Tekno NT48.3 Truggy Chassis by M2C Racing
The M2C Racing Tekno NT48.3 Truggy Chassis is machined from 4mm thick 7075 aircraft grade aluminum materials and clear anodized. Use of this material greatly increases the overall life of the chassis. On the stock chassis, the center diff area is milled out, but not open under the spur gear. This caused spur gears to break from hitting the chassis under hard flex. With the M2C chassis, the spur gear section is opened up fully, but not milled as much to provide the missing strength and lower CG.
This chassis features hardened droop stops to prevent chassis wear and droop changes, and as an added feature there are two 3mm countersunk holes in the back, right in front of the rear diff, to add optional M2C weights for added rear traction.
Replaceable Skid Plates
This chassis includes the M2C skid plate design that mount flush on the underside of the chassis. As normal wear happens, the replaceable skid plates will wear and can be replaced as needed, leaving the chassis fresher longer, making this chassis suitable for tracks with high wear characteristics. Additionally, since the skid plates mount flush with the underside of the chassis, they will not effect droop settings or scrub speed on landings.
- Center diff cutout lowers the CG by 2mm, and added material back to stiffen up the chassis, to decrease broken spur gears
- Made from 7075 Aluminum
- 4mm thick
- Uses the stock motor mount
- Includes front-rear and rear skid plates
- Hardened steel droop screw stops
- Spur gear opening
This product was added to our catalog on December 4, 2015.