The Team Brood Receiver Bypass Harness with Auxiliary Port is perfect if you’re running a hi-volt and/or hi-torque servo and want to power your servo directly from the BEC, rather than through the receiver. Plus, your receiver or any additional electronics may not be able to handle the higher voltage being fed into your receiver from the BEC, and in the case of vehicles like the Axial Capra, your dig servo may not handle the same voltage as your steering servo.
NOTE: Connect the servo to the +/-/signal plug and the BEC to the +/- plug. Signal/- connector plugs into the servo receiver channel. Use the additional +/- plug for powering accessories that do not require a signal, like lights. The servo gets its signal from the receiver and shares a dual ground path to both the receiver and BEC to prevent ground issues.
This product was added to our catalog on November 5, 2021