Tamiya PS-47 Pink/Gold Iridescent Lexan Spray Paint (100ml)

Read Reviews
Write a Review
In Stock Online
Usually ships in 24 hours
Check Store Availability
Please be aware that pricing and product availability in-store may vary from what’s available online because each store is independently owned and operated.

This is a 100ml can of Tamiya PS-47 Pink/Gold Iridescent Lexan Spray Paint. These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml (3oz) of paint, which is the appropriate amount for finishing one 1/10 scale model.

Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.

Warning: Never use these paints on plastic models.
NOTE: A layer of PS-5 Black should be applied after iridescent paint for better visual effect.

This product was added to our catalog on May 18, 2009

Verified Owner
Thursday, Aug 16 2018 (about 3 years ago)
Tamiya PS-47 Pink/Gold Iridescent Lexan Spray Paint (100ml)
This has been my go-to color for my last two bodies (offroad buggies). For 1/10 scale you need only 1 can and for 1/8 scale you need 2 for the best results. Start off with a very light coat or two, and then lay it on more while avoiding wet spots, and wait at least 15-20 minutes between coats. Back it with Black, and you'll get a stunning finish. Outdoors the color change effect is very satisfying, and indoors it changes colors, but also reflects indoor lights very nicely. The paint is quite durable too, I've never had any flaking. I like this color better than green/purple IMO, and I next plan on using it as the color for a racing stripe.