Tail Servo Step-Down Voltage Regulator w/LED Indicator by Western Robotics
Check Store Availability
Please be aware that pricing and product availability in-store may vary from what’s available online because each store is independently owned and operated.
$1.99 Flat Rate Shipping!
This item is eligible for $1.99 flat rate shipping Learn More
This is the Western Robotics Tail Servo Step-Down Voltage Regulator. The Tail Servo Step-Down Voltage Regulator is ideally designed to step-down a voltage source of 6 volts that is outputted from any external BEC (battery eliminator circuit) down to 5.2 volts. This allows an external 6 volt BEC to be used with Futaba 9241, 9251, 9253, 9254, 9255, and 9256 servo models, as well as other digital servos that are not capable of handling 6 volts. The Tail Servo Step-Down Voltage is equipped with male/female servo plugs and is ideally used in series with the RC models gyro and rudder servo to prevent any harmful damage overloading the servo. The Tail Servo Step-Down Voltage can also be used with any other applications that require a step down power voltage of approximately 0.8 volts.
Weight: 4 grams
- Ultra compact step-down voltage regulator cable to reduce 6V source to a safe 5.2V to the rudder servo.
- LED Indicator
- High power component to withstand current of up to 5 Amps continuous 10 Amps peak at 50V.
- Prevents harmful damage and overloading to the digital rudder/tail servo.
- Easy installation.
Weight: 4 grams
This product was added to our catalog on January 3, 2011.
Monday, Nov 7 2016 (about a year ago)
Western Robotics Tail Servo Step-Down Voltage Regulator w/LED Indicator
Unit works well, but there is no strain relief for the soldered connections. I had my solder joints fail in flight. So be mindful if you have a heli that shakes (nitro) and place where it will not be disturbed.)