Super Vortex Stock Brushless SSL ESC by Sanwa/Airtronics
This is the Sanwa Super Vortex Stock Competition Brushless SSL ESC. The perfect ESC for competitive stock racers, the SSL capable Super Vortex Stock ESC maximizes motor power, reduces resistance and improves heat protection control.
About SSL System
When used with a SANWA M12S or Exzes ZZ transmitter, RX-482/RX-472/RX-47T receiver and the SANWA SUPER VORTEX STOCK ESC, the SANWA Synchronized Link (SSL) system allows you to change many ESC programming values directly from the transmitter using the transmitter's CODE AUX function. In addition, telemetry data such as motor RPM, ESC temperature, motor temperature (if supported), and battery voltage can be read directly from the SUPER VORTEX STOCK ESC and displayed on the transmitter.
- Compatible with Cooling Fan (Size: 30mm/25mm)
- Black Almite Treatment
- New Function Compatible with CODE 10 for M12S and Exzes ZZ
- Boost Start
- Boost Acceleration
- Neutral Dead Band
Nominal Input Voltage: 3.7V-7.4V
Rated Current: 670A
Resistance Loss: 0.00038ohm
This product was added to our catalog on December 1, 2016.
Two small complaints:
1) The motor wires solder to the side of the unit, as pictured. This solder is extremely hard to melt, even with a high powered Haako iron. I had to put more heat into the ESC than I was happy with to get it soldered, but did not damage anything.
2) The power switch has too little resistance to it. It cut itself off on me twice during wrecks. I have since taped the switch into the on position and had no further problems.
The ESC is definitely ROAR approved. The person saying otherwise (on multiple product reviews) is wrong. You can verify this with the current ROAR approved list. The ESC cannot be taken out of blinky mode via the transmitter so cheating is not possible.)
not sure on this ESC, but it may or not work trying to use it in a 1S powered car)