SCRATCH & DENT: Bob Smith Industries FINISH-CURE 20 Minute Epoxy (13oz)

Store Availability Learn More

Frederick

Frederick, MD

Unavailable In Store

Check More Stores
Low Price: $25.99
Add To Cart Add to Wish List
In Stock Online!
Super Saver Shipping!
This item is eligible for Super Saver Shipping Learn More

This product was added to our catalog on March 9, 2016.

SCRATCH & DENT: Plastic blister pack has been cracked. Product is unused and undamaged.
Sold as is, photo of product may not be an accurate representation of product condition. ALL SALES ARE FINAL.

This is a thirteen ounce package of Bob Smith Industries FINISH-CURE™ 20 Minute Epoxy. FINISH-CURE™ 20 minute epoxy is an excellent, low odor substitute for polyester resins. It can be used for applying fiberglass cloth to wood or by itself to give wood a surface ready for primer and paint. FINISH-CURE™ can be sanded the easiest of all the BSI epoxies and is excellent for the sheeting of foam core wings. Allow 8 hours for full curing. For best results, FINISH-CURE™ should be heated to a temperature above 85*F or when applying light weight fiberglass, lay cloth on balsa first, then brush on FINISH-CURE™. When fully saturated, go over the surface with a heat gun, and then squeegee off excess epoxy with a playing card from an old deck. Heat and remove excess several times for a light weight finish. If room temperature is below 70*F use a heat gun on the surface several times for the next 2 hours. When dry, lightly sand, then fill surface with a low weight spackling compound, scrapping off excess with a playing card. Sand to a smooth finish ready for primer. For heavy weight fiberglass, apply the epoxy before and after laying down the cloth. FINISH-CURE™ is best mixed in a disposable cup.