The Scale By Chris Tote was developed specifically to fit three SBC 5 Gallon jugs. This allows you to put together any combination of Fuel (SBC006RED), Water (SBC006BLUE) or Diesel (SBC006YELLOW) jugs, to best suit the look you want from your rig. The tote measures approximately 37mm deep, 68mm wide and 29mm tall.
Printed at .2mm layer thickness with 20% infill, Scale by Chris scale accessories are designed, printed and hand detailed in house. Printed in small batches, nothing with the SBC name is ever outsourced, meaning Chris puts his hands on every part before it goes out the door. All this effort is done to create a higher quality finished product, with the details you need to take your build to the next level.
NOTE: As is the case with most 3D printed items, some light finish work may be needed to remove excess material. Simply use a sharp hobby knife to carefully remove small strings and straggler layer lines as needed.