Scale By Chris Small Generator
The Scale By Chris Small Generator is a 3D printed miniaturized replica generator that adds that perfect finishing touch to your scale project. This small size generator features hand painted control panel and fuel cap details and measures approximately 41mm deep, 30mm wide and 31mm tall. The small size generator is a perfect fit in the back of your truck and can be secured to your rig using a rubberized glue, or by drilling a hole in the bottom and using a screw through the body to hold it securely. The small generator also works well in your scale shop environment.
Printed at .2mm layer thickness with 20% infill, Scale by Chris scale accessories are designed, printed and hand detailed in house. Printed in small batches, nothing with the SBC name is ever outsourced, meaning Chris puts his hands on every part before it goes out the door. All this effort is done to create a higher quality finished product, with the details you need to take your build to the next level.
NOTE: As is the case with most 3D printed items, some light finish work may be needed to remove excess material. Simply use a sharp hobby knife to carefully remove small strings and straggler layer lines as needed.
This product was added to our catalog on October 18, 2016