The Scale By Chris 1/2 5 Gallon Fuel Jug is a 3D printed miniaturized replica that adds that perfect finishing touch to your scale build. This half size jug features a printed handle, lid and recessed details, and the half size option is perfect for builds that use a half depth cargo area, such as Axial or Pro-Line Jeep bodies, and truck bodies with half depth beds. Plus, you can combine this with the SBC half depth tote (SBC038H) and two other 1/2 size jugs of your choice for the ultimate in custom scale detail.
The half size water jug measures approximately 30mm deep, 20mm wide and 15mm tall and can be secured using a rubberized glue, or by drilling a hole in the bottom and using a screw through the body to hold the jug in place.
Printed at .2mm layer thickness with 20% infill, Scale by Chris scale accessories are designed, printed and hand detailed in house. Printed in small batches, nothing with the SBC name is ever outsourced, meaning Chris puts his hands on every part before it goes out the door. All this effort is done to create a higher quality finished product, with the details you need to take your build to the next level.
NOTE: As is the case with most 3D printed items, some light finish work may be needed to remove excess material. Simply use a sharp hobby knife to carefully remove small strings and straggler layer lines as needed.