SAB Goblin Tail Boom Tension Tool (Raw 420)

SAB Goblin Tail Boom Tension Tool (Raw 420)
In Stock Online
Usually ships in 24 hours
Note: Manufacturer does not allow coupons
Check Store Availability
Please be aware that pricing and product availability in-store may vary from what’s available online because each store is independently owned and operated.
SAB Tail Boom Tension Tool. This replacement tension tool is intended for the SAB Goblin Raw 420. Package includes one tension tool.

How to use the Tail Belt Tension Tool:
  • 1. Push the plastic pad into its seat by unscrewing the 2.5x12mm screw.
  • 2. Install the tool on the boom, it needs to touch the H1454 clamp.
  • 3. Tighten the 2.5x10mm screw to lock the tool onto the boom.
  • 4. Turn the 2.5x12mm screw to tension the tail belt.
  • This will push the boom back, thus tightening the tail belt.
  • 5. Once the correct tension is achieved, tighten the two boom clamps with the two 2.5mm screws.
  • 6. Remove the tool before flight

This product was added to our catalog on September 30, 2022