This is the Runcam Hybrid 2 FPV Camera.
- RunCam Hybrid 2:
- True 145° Wide Angle 4K HD & FPV Camera
- HD FOV 145° | Fantastic FPV Effect | Single Board Design
- FOV 145° 4K recording:
- Customized high-quality 7 layers of glass lens +SONY sensor,
- wider FOV, better image quality.
- FPV image upgraded to "Phoenix 2":
- Latency as low as 20MS, better FPV Image and more suitable for Free Style Flying
- Single board, simple installation:
- 20x20mm mounting sized single mainboard.
- Save more stack space.
- Compatible with more frames.
- QR code parameter settings:
- You can change resolution, shutter speed, ISO and so on through the RunCam App.
- Remote-control HD recording:
- After connecting Tx & Rx to the flight controller, you can easily start/stop recording by gently toggling the switch.
HD sensor: SONY 8MP
Analog sensor: SONY 1.3MP
Field of View (FOV): HD Recording FOV 145°(FPV FOV 150° @ 4: 3)
Video Resolution: [email protected] / [email protected] / [email protected] / [email protected] / [email protected] / [email protected] / [email protected]
Video File Format: MP4
TV Mode: NTSC (720*480)/PAL (720*576) Switchable
Interface: HD supports UART remote control; FPV(Analog) supports UART fimrware update.
Max Micro SD Card Supported: Up to 128G. Samsung's U3 card is recommended (2.7K60/1080P120 requires U3 or above; other solutions require U1 or above) Please make sure that the file format of the SD card is FAT32, otherwise, it will easily cause errors.
Mounting Holes Distance: 20*20mm
PCB Size: 29*29mm
Lens Module Size: 19*25mm
Lens Specs: HD Lens: M10 / FPV Lens : M8
Power Input: DC 5-20V (Non-direct power supply from 4s battery or above. Powered directly with battery will generate surges and burn the camera.)
Working Current: 480mA @5V / 140mA @12V
- (1) Hybrid 2 Camers
- (1) Plastic cover
- (1) 3PIN FPV silicone cable(male)
- (1) 3PIN FPV silicone cable(female)
- (1) Set of M2 screws
- (1) Manual
This product was added to our catalog on March 4, 2021