Revolectrix Dual PowerLab 8 Touch SII DC Battery Workstation (8S/40A/1350W x2) w/Integrated Bump Controller
The Revolectrix Dual PowerLab 8 Touch SII DC Battery Workstation is a 1350 Watt, dual channel, multi-chemistry battery workstation, with integrated Bump Controller and touch screen technology. The redesigned PowerLab Touch SII Battery Workstations from Revolectrix combine the amazing power, reliability, flexibility, and intuitive operation of the original Cellpro PowerLab series, with integrated BUMP Technology. All SII models include the following improvements: 1500V Power Isolation, Opto-isolated Data Ports, and Improved Noise Filtering for Rock Solid Performance to maximum spec. limits.
These flagship products represent the best REVO has to offer; 6s or 8s capable, Multi-Chemistry, Single or Dual Channel Charging "engines" based on time-proven reliable power circuit designs, married to a powerful, color touch LCD user interface; the best of what the original BUMP Controller has to offer, including NFC BUMPTag operation, Preset, or Manual Control of all Battery Management functions; on-screen real-time monitoring of all important data, integrated USB, and integrated Bluetooth 4LE for Android, and iOS Mobile Devices. All PowerLab Touch chargers are equipped with an EC5 connector on the input cable. Units are packaged with six formatted, blank BUMPTags and the USB cable for updating firmware.
What is BUMP?
BUMP is an exclusive Revolectrix concept for Battery Management. BUMP technology utilizes Near Field Communication (NFC) technology to communicate with any battery equipped with a BUMP Compliant Tag, or “BumpTag”. BumpTags are pre-installed and pre-configured on most Revolectrix batteries, but are also available separately, so a customer can configure them for use with any battery of his choosing. Once a BumpTag is programmed for a given battery, a simple “BUMP” of the battery on a Revolectrix BUMP-compliant charger or controller and it is ready to charge. The Revolectrix PowerLab Touch chargers have BUMP support built in, while BUMP support may be added to any legacy (or up to 4 of legacy) Cellpro PowerLab Battery Workstations by connecting a BUMP Controller which takes complete control of the PowerLab Workstations. Unlike conventional methods of battery maintenance which require adjusting settings for every operation, with BUMP technology, packs only need to be configured one time – when the BumpTag is configured, charging is as simple as BUMP, CONNECT, and GO!
Input Current: 40A Max.
Output Current: 40A Max.
Output Power: 1350W - per channel
Input Voltage Range: 10-48VDC
Input Amps Max: 80A
Supports: 1s to 8s LiXX; 1-21S NiXX; 12V Pb - per channel
Internal Discharge: 10A/95W - per channel
Regen Discharge: 40A/1350W - per channel
NOTE: The Touch series chargers include a JST-XH balance port on the charger, allowing balance tap connection with standard JST-XH plugs directly into the charger. If you are using a separate adapter, the cables used on the legacy PowerLab series chargers are not compatible with the Touch series. Revolectrix recommends the MPA-4P for charging multiple Li battery packs of same cell count in parallel. Be sure to purchase the correct MPA-4P version that matches the main connector brand on your battery packs. Click here to view product manual and download Charge Control Software to your PC.
This product was added to our catalog on April 30, 2020