Red Bull Edge 540 BNF Basic Electric Airplane by Staufenbiel
Staufenbiel's Red Bull Edge 540 1300mm is an incredible replica of the Flying Bulls unlimited-class Edge 540 seen at air shows and unlimited class air races around the world. Z-Foam construction means that a beautiful appearance can be achieved while maintaining light wing loading and remarkable durability. The use of composite reinforcement used throughout the airframe adds a high level of rigidity so aggressive maneuvers can be performed at high-speed with incredible precision. Like the full-scale Edge 540, this is a lean machine with lots of muscle under the hood. The 32-size outrunner brushless motor offers the perfect balance of speed and torque so whether you’re hanging it on a wing tip through the pylons or standing it on the rudder for a torque-roll, you’ll feel as if there’s performance to spare. Every electronic component, including the power system, is factory installed. Among those components is the industry-leading Spektrum AR636A receiver with built-in AS3X technology. A benefit of its installation is that you’ll find the time needed to perfectly trim-out the Edge 540 is virtually nonexistent. That’s because the complex array of sensors and exclusive software used to develop the AS3X system in this Edge 540 has been specially tuned to make it fly like its on rails, right out of the box.
The vibrant Flying Bulls trim scheme and appearance is officially licensed in cooperation with Red Bull for a sense of realism that inspires both the thrill of racing and the exhilaration of aerobatic flight.
Every 17-gram Spektrum servo is secured in place so that’s it can be easily serviced with just a screw driver. They feature digital precision and metal-gear durability.
For storage and transportation convenience, the wing panels attach with concealed screws inside the magnetic belly hatch and share a composite wing joiner tube.
Brushless Power System
The power system features a high-torque 32-size brushless outrunner with a 760Kv rating and 60-amp ESC that when combined with your 2400–3200mAh 4S Li-Po battery delivers thrust that feels virtually unlimited.
Durable Z-Foam™ Material
Durable Z-Foam™ material provides the ability to replicate complex airframe detail with greater accuracy while delivering a very light flying weight.
Embedded within the hollow airframe is additional carbon-fiber and composite support that makes the structure very rigid so that high-speed flight and aerobatics can be performed with greater precision.
Exclusive AS3X® Technology
The advanced AS3X® (Artificial Stabilization – 3-aXis) system built into the Spektrum™ 6-channel AR636A receiver is what helps give this Edge 540 an incredibly solid look and feel in the air—especially during complex aerobatic maneuvers. It works behind the scenes to help counter the effects of wind and turbulence by combining 3-axis sensing with specially tuned flight control software. As a result, the thrilling experience you’d expect to have with an aerobatic racer like this Edge 540 is made even better because your workload to make the flight look flawless is significantly reduced.
- Officially licensed Flying Bulls trim scheme
- AS3X® technology for rock-solid flight stability
- 4-channel control including a steerable tail wheel
- Two-piece, plug-in wings and stabilizers with composite tube spar
- Spektrum™ 6-channel AR636A DSMX® receiver (installed)
- High-torque, 32-size brushless 760Kv motor (installed)
- 60-amp brushless ESC with 3A SBEC (installed)
- 4× Spektrum digital, metal-gear micro servos (installed)
- Lightweight construction with durable Z-Foam™ material
- Realistic spinner and 3-blade propeller
- Clear canopy and cockpit detail including pilot figure
- Large top battery hatch and belly receiver hatch
Wingspan: 52 in (1320mm)
Overall Length: 50 in (1270mm)
Flying Weight: 3.7 lb (1680g)
Motor Size: Brushless Out runner Motor 3948-KV760
Radio: 4+ channel radio required
Servos: 4 × 17g digital metal gear servo
Trim Scheme Colors: Licensed Red Bull trim scheme
CG (center of gravity): 3.15 in (80mm) from leading edge
Prop Size: 13×5 3-Blade
Speed Control : 60A Brushless ESC
Recommended Battery: 14.8V 2600mAh 25C Li-Po
Approx. Flying Duration: 6 minutes
Landing Gear: Yes
Assembly Time: Less than 1 Hour
Is Assembly Required: Yes
Needed To Complete:
- 2400mAh 4S 14.8V 25C Li-Po battery
- AC/DC 4S Li-Po Compatible Balance Charger
- 4+ channel, full-range 2.4GHz transmitter with Spektrum™ DSM2®/DSMX® technology
This product was added to our catalog on October 30, 2015.