Red Baron Epoxy Finishing Resin epoxy formula is not rubber toughened, but then it really doesnít need to be for this application. Red Baron Epoxy Finishing Resin is designed to work with any weight of fiberglass cloth for model aircraft, boats, and is more than strong enough to be used with confidence on full size projects too. Red Baron finishing resin epoxy has a low viscosity and wets heavy glass cloth easily for reinforcing wing center sections, plastic cowls, wheel pants, etc. It is also perfect for use to laminate light weight glass cloth on any balsa or foam surface to add strength and prep the surface for a great finish. It can also be used on raw balsa to strengthen it and prepare it for a painted finish as well. While all our epoxies can be sanded, Red Baron Epoxy Finishing Resin sands the best and will not load even fine sandpaper. This allows it to be readied for primer and paint without a lot of elbow grease. Red Baron Epoxy Finishing Resin does not require using a heat gun on the surface of the epoxy to get it to flow and lay down evenly as our competitorís products do. If you click on the link to tips on using our products you will find complete step-by-step instructions on how this is done.
This product was added to our catalog on November 1, 2016