Rear A-Arms (Blue) (RC10GT2 & SC10GT) (2) by RPM
This product was added to our catalog on August 7, 2009.
This is a set of two optional blue rear A-arms from RPM and are intended for use with the Associated RC10GT2. The long-running success of RPM A-arms for the original GT has led to the release of RPM A-arms for the newest gas truck to come from Associated – the GT2. RPM GT2 A-arms were designed to solve several customer-related complaints about the stock A-arms. Foremost is durability. The RPM GT2 rear A-arms are designed to withstand some serious abuse! RPM GT2 rear A-arms are just flat-out beefy!
RPM also focused on the hinge pin retaining system used on the stock A-arms. Using a small screw hole so close to the hinge pin like the stock arms weakens the A-arms at that point. RPM moved the hinge pin retaining screws in-line with the hinge pins, significantly strengthening the A-arms in the process. By eliminating the smaller 2-56 hinge pin retaining screws, RPM has eliminated the problem of the hinge pins falling out due to varying screw head diameters, which seems to be a rather large problem.
NOTE: These arms will not work on the RC10T4, and SC10 trucks.