The RC4WD 1/10 KC HiLiTES C Series High Performance LED Light Bar is an officially licensed 40mm replica of the KC HiLiTES Light Bar. This will make any project look better and add much needed lighting and visibility to your project. Plus, its fully compatible with a standard 2S LiPo, or 11.1V/3S LiPo when used with a BEC.
- Cast Molded Housing
- Reversible "L" brackets to fit many applications
- Adjustable "L" brackets for rotating light
- 14 Individual LED bulbs
- Super Bright Lighting
- Vented on side to dissipate heat
- Works with up to 11.1v lipo with use of a BEC to regulate voltage below 7.4 volts
- Standard Receiver Plug
- 2mm Mounting Holes
Overall Length: 2.2in / 56mm
Light Bar Width: 1.57in / 40mm
Overall Height: 0.81in / 20.8mm
Light Bar Height: 0.63in / 16.2mm
Weight: 0.88oz / 25g
- (1) RC4WD KC HiLiTES 1/10 C Series High Performance LED Light Bar (40mm/1.5")
- (2) Light Mounts
- (1) KC HiLiTES Decal Sheet
- Use medium grade thread lock on "L" bracket nut to prevent loss and to keep the light in position.
- Uses 2mm mounting hardware.
- Unit needs to be directly connected to 7.4 volt battery. Can also be connected to 11.1volts with use of BEC.
- The light bar comes with a standard receiver plug, this is only for ease of use. The receiver will not provide enough power for the light bar causing it to be dim. If you want the light to be brighter, you will need to power it directly from your battery or use a BEC to get more power to your receiver.
- Rampage Front Double Tube Bumper with Hoop for Trail Finder 2 SWB (RC4ZS1558)
- Tough Armor Winch Bumper with Grill Guard to fit Axial SCX10 (RC4ZS0160)
- Tough Armor Stubby Front Bumper to fit Axial SCX10 (RC4ZS0641)
- Tough Armor Competition Stinger Bumper to fit Axial SCX10 (RC4ZS0640)
- Jeep JK Rampage Recovery Bumper to fit Axial SCX10 Chassis (RC4ZS0434)
- Tough Armor front Bumper for G2 Cruiser (RC4ZS1606)
- Tough Armor Winch Bumper with Grill Guard for Axial Jeep Rubicon (RC4ZS1193)
- RC4WD Marlin Crawlers Front Steel Tube Bumper for Trail Finder 2 (RC4ZS0778)
- Rampage Front Recovery Bumper (RC4ZS0997)
- Tough Armor Wide Winch Bumper with Winch Bar (RC4ZS1162)
- Tough Armor Tube Front Winch Bumper for Vaterra Ascender (RC4ZS1575)
- RC4WD Marlin Crawlers Front Plastic Tube Bumper for Trail Finder 2 (RC4ZS0594)
- Tough Armor Front Tube Bumper w/Winch Mount for Trail Finder 2 (RC4ZS0765)
This product was added to our catalog on June 14, 2016