Ranger EX Long Range FPV PNP Brushless Pusher Airplane by Volantex R/C w/GoPro Hero 3 Gimbal
This product was added to our catalog on June 16, 2016.
Are you ready for long range FPV travel?
The Volantex Ranger EX is an ultra-durable, long range stable aircraft, specifically designed to meet your demands of FPV flight. It is composed of two pieces, the wings and fuselage, making transport and storage quick and easy. It offers multiple camera/gimbal mounting locations, for use with GoPro cameras and others. Tall landing gear and a rear dragger wheel offer safe take-offs and landings, eliminating the need to launch by hand. Large payload, high-capacity batteries, large flight times... this is the Volantex Ranger EX.
Starting with a unibody fuselage, crafted from copy written one-step technology, the PVC fuselage is far more durable and crash resistant than the EPO foam typically used, and it's designed with the FPV pilot in mind! Internally, there is plenty of space for larger hands and fingers to wire electronics and setup the configuration. Up front, the canopy cavity has been created extra large providing nearly twice the room to similar models, enough to stow two high-capacity batteries, and all the required electronics.
The exterior of the Ranger EX is purpose created as well; back in the tail section you'll find a flat mount designed specifically for the video transmitter and antenna, providing improved isolation between your VTX and radio control and flight control systems. Throughout the fuselage you'll find several mounting locations for cameras as well - top of the wing, on the canopy, underneath the canopy, with a gimbal, or without - all without modifications. And when it's time to calibrate the system, in the center of the wing, you'll find an integrated level letting you know you're ready.
- Includes 2D Brushless Gimbal for GoPro Hero 3
- Big space, durable unibody design
- Special airfoil design for carrying big weight
- Compatible with most types of camera mounting
- Capability to carry Camera Gimbal
- Quick, easy to assembly, no glow required
- Light weight and durable EPO wing construction
Wingspan: 1980mm (77.9 in)
Overall Length: 1170mm (46 in)
Flying Weight(without battery): 1500g
Prop Size: 1060 Propeller
Motor Size: 3715 powerful out runner brushless motor
Speed Control: Easy-Plug 40A Switch-mode BEC brushless ESC
Servo: 9-gram Servo (6 x included)
Recommended Battery: 11.1V 3S/14.8V 4S 1800mAh ~ 10000mAh LiPo
Charger: Not included
Radio: 2.4Ghz 6-Channels
Minimum Age Recommendation: 14 years
Experience Level: Beginners ~ Expert
Recommended Environment: Outdoor
Assembly Time: Less than half hour
Is Assembly Required: Yes
Needed To Complete:
- 2.4Ghz 6-Channels Radio System
- 11.1V 3S/14.8V 4S 1800mAh ~ 10000mAh LiPo Battery
- Compatible Battery Charger
FPV Equipment Needed:
- Video Transmitter (Tx)
- FPV Headset Goggles or Monitor