Racer Speed Build Electric Airplane Kit (1016mm) by Flite Test
This product was added to our catalog on August 2, 2017.
The Flite Test Racer is inspired by modern day air racers and has a lot of the same characteristics as the planes it was designed after. This plane is a fast, crisp, precise and locked in machine that cuts through the air like an arrow. Though the FT Racer is very quick, it also has a very wide speed envelope, it tracks very well, and would be a great introduction to sport pattern flying and aerobatics.
Power Pack Compatibility:
Flite Test Airplanes are all designed around the use of various "Power Packs" which include an inexpensive Motor, ESC, Servo, & accessory package to complete each aircraft! The compatible power pack is listed below.
Weight: 1.1Lbs (Fully assembled; without battery)
Wingspan: 40 Inches (1016mm)
Center of Gravity: 2.3 Inches (60mm) from leading edge of wing (Recommended)
Control Surface Throws: Ailerons & Elevator: 12 degrees | Rudder: 25 degrees
Expo Suggestions: 30%
- Laser-cut Foam Airframe
- Posterboard Front & Back Turtle Deck
- Posterboard Canopy
- Power Pod (Swappable)
- Push Rods
- Control Horns
- Bar-BQ Skewers
- Specification Sheet
Needed to Complete:
- (1) Brushless Motor: Park 400 Type, 810kV minimum
- (1+) Propellers: 8x6 or 9x4.7
- (1) ESC: 18-30 Amp
- (1+) Battery: 3S 11.1V LiPo 1800-3000mAh
- (4) Servos: ~9 Gram Micro Servos