QuadPack 25 Multi-Rotor 25-Amp ESC Set (4 Pack) by Castle Creations
This product was added to our catalog on December 2, 2013.
This is the Castle Creations QuadPack 25 Multi-Rotor 25-Amp ESC Set. It wasnít until recently that Castle decided to spin into the Multi-Rotor market, and provide R/C enthusiasts with some of the most versatile and inventive systems ever devised. Enter the next master of the Multi-Rotor, the QuadPack 25. This pack of four (4) 25 amp ESCs have already been optimized for use in your Quadcopter or Multi-Rotor by utilizing three (3) ESCs without a BEC and one (1) with a BEC. No more hassling with disabling the BEC on three of the ESC, this package is made specifically to save you the headache.
The small footprint and lightweight design makes it the perfect choice for smaller Quads and Multi-Rotors. A 490 Hz refresh rate makes the QuadPack 25 the epitome of stability during all aspects of flight from a simple hover to the most extreme maneuvers. Recommended for platforms pulling up to 25 amps** and running up to 6S LiPo, your Quadcopter or Multi-Rotor platform will perform as never before. While pre-programmed for your Multi-Rotor, the QuadPack 25 offers industry-leading software functions and USB programming capability via Castle Link USB adapter should you require them (Castle Link sold separately).
Continuous Maximum Current: 25A
Input Voltage: 7.4-22.2V (2-6S LiPo)
Input Connector Types: Bare Wire
Output Connector Types: Bare Wire
Length: 1.72in (43.7mm)
Width: 0.72 in (18.2mm)
Height: 0.32 in (8.1mm)
Weight: 0.63 oz (17.8 g) each without wires
BEC Voltage: 5.5V; 3A continuous, 8A peak (always check servo draw prior to first flight)
**NOTE: RC HOBBY APPLICATION RATING: 25 amps for the duration of a single 4,000 mAh battery pack with the ESC's in contact with a 5 mph airflow of 25C (77F) or cooler air. Controller temperature must never exceed 100C (212F). Exceeding current or temperature ratings may damage components and may shorten the life of the ESC. Always verify system current draw at full-throttle. Decrease load or increase airflow to decrease the ESCís operating temperature.