Pulsar Pro LiPo/NiMH Battery Charger (6S/10A/80W) by LRP

Check Store Availability
Please be aware that pricing and product availability in-store may vary from what’s available online because each store is independently owned and operated.
LRP
LRP41421US
Note: Manufacturer does not allow using discount coupons
Low Price: $124.99
Add To Cart Add to Wish List
In Stock Online!
Usually ships in 24 hours

This charger is intended to charge NiCd/NiMH type rechargeable batteries (1 - 15 cells), LiPo/LiFe/LiIon batteries (1 - 6 cells) and lead acid batteries (2V - 20V). The charge current can be set between 0.1A and 10.0A depending on the connected batteries and their cell number/capacity. Batteries can also be discharged; the discharge current is between 0.1 to 5.0 A. The charger can be connected directly to AC power (100 – 240 V/AC, 50/60 Hz) or to a stabilized power supply with a voltage between 11 V/DC and 18 V/DC. A two-line illuminated LC display and four keys are used to control the charger. A balancer is integrated into the charger for LiPo/LiFe/LiIon batteries, with balancer connector sockets for the battery located on the right side of the charger.

Features: 

  • 1S-6S LiPo
  • Charge + Discharge + Cycle
  • 10A Fast Charging
  • 100v-240V AC
  • 11V-18V DC
  • USB Charge Output

Specifications:
Dimensions: 143x160x60mm
Weight (excluding charge wires): 620g
Input voltage range: 11-18V [DC] 100-240V [AC]
Charging capability: 1-6 cells [LiPo/LiFe/LiIo] 1-15 cells [NiMH/NiCd] 2 -20V [Pb]
Charge power max.: 80W
Charge current: 0.1-10.0A
Trickle current: 0-300mA
Storage charge mode: Yes
Discharge power max.: 25W
Discharge current: 0.1-5.0A
Discharge cut-off voltage: 0.9-19.8V
Delta peak cut-off sensitivity: 5-200mV/pack
Autostart timer: 0-99[min]
Cycle mode: NiCd/NiMh
User profile memory: 5
Safety timer: 1-720min
Acoustic signal type: Buzzer
Display: LCD 16x2, blue backlit
Buttons: 4
Multi Protection System: Yes
DC input connection: pluggable DC input wire
AC input connection: Internal SMPS plug
Output connection: alligator clips with 4mm plug
Internal cooling fan: Yes
USB connection: Yes
USB charge output: 5V/2.1A
Integrated balancer: XHR-style, 2S-6S
Temperature Cut-off: 20-80°C (optional)
Updateability: Yes

This product was added to our catalog on May 23, 2018