Precision RC Works H.O.G. Hand Of God Standard Servo Winch (External Spool) (270oz - no controller)

Precision RC Works H.O.G. Hand Of God Standard Servo Winch (External Spool)
In Stock Online
Usually ships in 24 hours
$1.99 flat rate shipping! Learn More
Read Reviews
Write a Review
Check Store Availability
Please be aware that pricing and product availability in-store may vary from what’s available online because each store is independently owned and operated.

The Precision RC Works H.O.G. Hand Of God Standard Servo Winch with external spool is a fast and strong winch developed for competition, that will not break the bank. This winch delivers 270 oz/in of pulling power at only 6v, and is equipped with 11 feet of 250 pound line. The H.O.G. includes a factory installed JST plug to allow simplified installation and compatibility with a variety of winch controllers.

Features:

  • 270 oz/in of pulling power at 6v
  • Equipped with 11ft of 250lb line
  • Includes scale winch hook
  • Factory installed JST plug allows compatibility with a variety of winch controllers
  • Backed by a manufacturers limited lifetime warranty against defects!
NOTE:
  • Does not include a winch controller.
  • Due to the nature of this item, it carries a depot warranty, meaning the winch must be returned to the manufacturer. Please contact the manufacturer directly for an RMA to mail it back in for a quote on service to repair or replace. Motors, gears, and other parts can all be replaced thru depot service at very reasonable rates.*
  • The color of the winch line that each winch includes is chosen at random by the manufacturer, and may not match the color of the winch line shown in photos.  

Specifications:
Weight: 65g
Dimensions: 40.2 x 20.1 x 36.8mm
Operating Voltage: 4.8v-6.6v
Stall Torque (4.8v): 250 oz-in (18.0kg.cm)
Stall Torque (6.6v): 277 oz-in (20.0kg.cm)
Operating Speed (4.8v): 0.18sec/60 degree
Operating Speed (6.0v): 0.15sec/60 degree
Servo case: Alloy center case 
Gear Type: Metal gear
Bearing: Double ball bearing
Operating Temperature Range: 32 ~ 131°F (0 ~ +55°C)
Verified Owner
Wednesday, Oct 28 2020 (5 weeks ago)
Precision RC Works H.O.G. Hand Of God Standard Servo Winch (External Spool)
The drum spool was too tight of a fit and was rubbing the Servo housing/case. It caused the winch controller to think it had hit the rewind-end. I had to take off the drum spool, and sand down the side facing the servo by at least 3mm.

Second, the servo housing tabs for the screws broke off during installation. Very brittle plastic with the servo case so be careful. I beefed it up with special screws and washers.

Despite those things, the servo winch is very strong and works as intended. I use it with a Precision RC works Cheapy winch controller.