Powerswitch by Robitronic
This is the Robitronic Powerswitch. The Powerswitch is an electric switch for nitro and gas-powered vehicles that replaces the standard mechanical on/off switch, with a high tech dust and water-protected solution that also allows the user to monitor the receiver battery voltage! Programmable for 2S LiPo, 2S LiFe and 5 cell NiMH packs the switch recognizes low receiver battery voltage and poor connector contact and will warn the operator. The switch is high voltage compatible, has a JST input connector, and can be used with applications up to three servos or 10A peak current.
NOTE: The Powerswitch is only a switch and does not regulate voltage. If you use a 7.4V LiPo battery you have to make sure that your receiver and your servos are able to handle high voltage.
Input voltage: 3.5 - 10V
Max. current: 10A
Current draw (switched off): Approx. 69μA
Operating ambient temperature: 14F to 122F (-10°C to 50°C)
Dimensions (LxWxH): Approx. 25 x 17 x 7.6mm (without cables)
Weight: Approx. 9g
This product was added to our catalog on April 30, 2012