This is the MKS DS1009 Standard Digital Cyclic Servo.
Tech Note: Do not exceed 5.8V, as outlined on manufacturer specifications. Failure to follow this will result in premature failure of this servo!
DS-1009 Specifications:
- Dead band: 0.002ms (Default)
- Control System: +Pulse Width Control
- Working frequency: 120Hz
- (RX) Required Pulse: 3.0~5.0 Volt Peak to Peak Square Wave
- Operating Voltage: 4.8~5.8 V DC Volts
- Operating Temperature Range: -10 to + 60 Degree C
- Operating Speed (4.8V): 0.125 sec/60° degrees at no load
- Operating Speed (5.8V): 0.10 sec/60° degrees at no load
- Stall Torque (4.8V): 111.79 oz/in (7.04 kg-cm)
- Stall Torque (5.8V): 138.87 oz/in (8.8 kg-cm)
- 360° Modifiable: NO
- Motor Type: DC Motor
- Potentiometer Drive: Direct Drive
- Driver Type: FET
- Bearing Type: Dual Ball Bearings
- Gear Type: metal gear
- Programmable: NO
- Connector Wire Length: 15.0 cm (5.9")
- Dimensions: 40x20x40.30mm (1.57x0.78X1.58")
- Weight: 56g (1.97 oz)
This product was added to our catalog on April 22, 2016
