Mini Receiver (FrSky) by Furious FPV

Store Availability Learn More

Frederick

Frederick, MD

Unavailable In Store - Check Others
Furious FPV
FPV-MINI-RX
Low Price: $22.99
Add To Cart Add to Wish List
In Stock Online!
Usually ships in 24 hours
Super Saver Shipping!
This item is eligible for Super Saver Shipping Learn More

This product was added to our catalog on January 13, 2017.

The Furious FPV Mini RX is designed for Micro Quads, and used on the Furious FPV Toretto 130 Racing Drone.

Features:

  • FrSky Compatible
  • 500 Meter Range
  • 2.5g All up Weight
  • S-Bus compatibility
  • 8 Channel Output
  • RSSI output on Channel 9
Specifications:
Range:
Up to 500 Meter
Input Voltage Range: 4-6V
Weight: 2.5g
Compatibility: FrSky Taranis, Taranis Plus, & XJT

Configuration

Following, thereís some useful info for the setup and use of your Furious Mini RX.

1. Binding the receiver to the Frsky Taranis
In the Taranis, go to MODE SETUP (page 2) in the model configuration.
Go to Mode inside Internal RF and select D8.
Press and hold the receiver bind button and plug your battery in to turn the receiver on.
Release the button. A green LED lights up in the receiver.
Going back to the Taranis; we press BIND. The transmitter beeps, indicating itís in bind mode.
Wait for the green LED on the receiver to turn off. The binding procedure has finished.
Exit the BIND mode in the Taranis.
Unplug the battery to turn off the receiver.

2. Binding the receiver to the XJT module
Using the dip switches of the XJT module, select the D8 mode. They should be in the following position: switch 1 = ON, switch 2 = OFF.
Press and hold the receiver bind button and plug your battery in to turn the receiver on.
Release the button. A green LED lights up in the receiver.
Press and hold the bind button and turn the transmitter on.
Release the button. A green light should blink in the module, indicating itís in bind mode.
Wait for the green LED on the receiver to turn off. The binding procedure has finished.
Turn the transmitter off.
Unplug the battery to turn off the receiver.

3. Receiver Configuration in the Cleanflight configurator
In the PORTS PORTS tab, select the UART that corresponds to the receiver (usually UART3 in F3 flight controllers) and activate Serial RX.
Save by clicking on the Save and Reboot button.
In the CONFIGURATION tab, in the Receiver Mode section, select RX_SERIAL.
In the same tab, in the Serial Receiver Provider section, select SBUS.
Save by clicking on the Save and Reboot button.
Go to CLI and type the following commands:
set sbus_inversion = OFF
save
The FC will reboot, applying the change.
Go to the RECEIVER tab and make sure the receiver acts like it should.

4. Telemetry Configuration:
In the PORTS tab, select the UART that corresponds to the telemetry (usually UART2 in F3 flight controllers) and select FrSky in Telemetry. Leave the baudrate to AUTO.
Go to CLI, and type the following commands:
set telemetry_inversion = ON
save
The FC will reboot, applying the change.
Make sure youíre getting the telemetry values in our Taranis correctly.