Mighty Mini Tiny Trainer Speed Build Electric Airplane Kit by Flite Test
Super Saver Shipping!
This item is eligible for Super Saver Shipping Learn More
This product was added to our catalog on August 2, 2017.The Flite Test Tiny Trainer is a Mighty Mini that is specifically designed to cover all the basics when it comes to RC Flight. Whether you are a beginner yourself, or if you are trying to bring a newcomer into this wonderful hobby, the Tiny Trainer will assist them in making every flight a great experience! This plane can be built and converted into 4 different designs that will guide you through every level of getting started flying.
Interactive Tiny Trainer Build Guide HERE!
Educators, group leaders, and parents looking to make a memory with a loved one can build the Tiny Trainer as a free flight (hand tossed) glider or a powered RC airplane. A little clay in the nose for balance, and your ready to toss the plane back in forth with a friend! Remove the clay and add 2 servos and you have a great 2 channel glider to learn elevator and rudder control. Swap out your glider nose for the powered nose and enter into the world of 3 channel flight. Once you are comfortable with slow lazy eights and graceful loops, remove the polyhedral wing and replace it with the included sport wing. The sport wing will teach you bank and yank skills and enter you into world of aerobatics and precision flight. Install a 3 cell battery and go from cruising to cutting up the sky with vertical lines and exhilarating speed.
The Tiny Trainer will also get you up to speed with techniques used with all FT designs. Every technique from "A Folds" to Folding wing airfoils will be used in this one build.
This airframe was developed around our Power Pack A electronics kit which is used with the Mighty Mini Series.
Weight: 6.8 Oz (Fully assembled; without battery)
Wingspan: 37 Inches (940mm)
Center of Gravity: 1.5-1.75 Inches (38-44mm) from leading edge of wing (Recommended)
Control Surface Throws: 16 Degrees
Expo Suggestions: 30%
- Laser-cut Foam Airframe
- Power Pod (Mini)
- Firewall (Mini)
- Push Rods
- Control Horns
- Bar-BQ Skewers
- Rubber Bands
- Specification Sheet
Needed to Complete:
- (1) Brushless Motor: Park 250 2200kV minimum
- (1+) Propellers: 6x3
- (1) ESC: 12-20 Amp
- (1+) Battery: 2S-3S 7.4V-11.1V LiPo 500-800mAh
- (2-4) Servos: ~5 Gram Micro Servos