Matek Mini Power Hub w/BEC (5V & 12V) by RaceTek

$1.99 Flat Rate Shipping!
Low Price: $9.49
Add to Cart Add to Wish List
In Stock Online!
Limited Quantities Available.
This item is eligible for $1.99 flat rate shipping Learn More
Check Store Availability
Please be aware that pricing and product availability in-store may vary from whats available online because each store is independently owned and operated.
Mini Power Hub has been designed to provide the best possible performance and reliability in a small 36x36mm PCB. The Hub distributes power from a battery pack to 4 ESCs, as well as providing synchronised & regulated DC outputs for powering cameras, servos, video transmitters, LEDs, etc. Batteries may range from 3S to 6S LiPo. The Hub also features convenient solder bridge of various voltage for Camera & Video TX.

  • General:
    • Input voltage range (3S-6S operation): 9 - 26VDC
    • Regulated 5V and 12V outputs
    • LED power indicators (5V & 12V outputs)
    • 4 ESC outputs
  • ESC Outputs:
    • Continuous current: 20A per output
    • Peak current (10 seconds/minute): 25A per output
  • BEC 5V Output:
    • Designed for RC Receivers, Flight controllers, OSD, and Servos.
    • DC/DC synchronous buck regulator, Efficiency is up to 95%.
    • Voltage: 5.0 +/- 0.1VDC
    • Continuous current: 3 Amps
    • Short-circuit tolerant (10 seconds/minute)
    • LED (indicates voltage is in regulation)
  • BEC 12V Output:
    • The battery should be 4S~6S LiPo
    • Standard output designed to power cameras and video transmitters,etc.
    • Voltage: 12.0 +/- 0.2VDC
    • Continuous current: 2 Amps (Max 3A 10s/minute)
    • Short-circuit tolerant (10 seconds/minute)
    • LED (indicates voltage is in regulation)
  • CAM & VTX Voltage Bridge:
    • 3S operation. choose VCC for 12V camera & 12V VTX, VCC=Battery Voltage.
    • 4~6S operation, choose 12 for 12V camera & 12V VTX
    • 3~6S operation, choose 5 for 5V camera
    • Video pass through from the CAM pad to the VTX pad
  • Physical:
    • Dimensions: 36 x 36mm
    • Weight: 6g
    • Mounting holes 30.5mm square spacing

This product was added to our catalog on July 20, 2016.