This is an optional M2C Racing Tekno 48.3/48.4 Front Suspension Support Block Set. This model fits both 48.3 and 48.4 buggies and truggies. Made using 7075-T6 Aircraft aluminum and anodized black, these blocks are designed to stand up to the rigors of RC car racing. These blocks have been made to be heavy duty and should withstand nearly any crash. The kit also uses the M2C special tapered hinge pins that allow the pins and the arm to rotate in the bushing. In the event of a really bad crash the pins are designed to bend at the weakest point of the pin. This will allow the arm to still move freely.
- (3) hinge pins (M2C6737)
- (4) "0" centerline bushings (M2C6730)
- (4) ".5 degree offset centerline bushing (M2C6731)
- (4) "1" degree offset bushing (M2C6732)
- (2) 3x16 mm socket head cap screws
- (2) 3x35 mm socket head cap screws
NOTE: YOU MAY HAVE TO MODIFY THE ROCK GUARDS ON THE 48.3 SLIGHTLY TO FIT AS THE BLOCK IS THICKER THAN STOCK. A SMALL AMOUNT WITH A HEAT GUN SHOULD DO THE TRICK NICELY.