M2C Hot Bodies D812 Buggy/Truggy Electric Motor Mount
The Hot Bodies D812 Buggy/Truggy Electric Motor Mount is machined from 6061-T6 aluminum and is 3/8 wide to give you a very solid base, anodized black this mount also offers an additional optional anchor hole that you can drill yourself with the included drill bits and countersink bit, to give even more support for a rock solid mount.
This model also utilizes a split diff mount to allow you easy access to the diffs by removing four screws from the top, and will not affect the gear mesh. This mount also provides improved clearance for the center diff. The slide will allow you to have the option of running a 14 to 23 pinion gear. The slide mount is anchored with two 4mm button head screws in the top and one 3mm screw in the bottom to give you a rock solid mounting system.
NOTE: M2C recommends that you do not tighten any of the screws down until you have the system fully assembled, with differential installed to allow all the mating parts to seat correctly.
This product was added to our catalog on April 20, 2016