The M2C Hot Bodies D8 2017 V2/2018 Gas Buggy Chassis is machined from 1/8 inch thick (3.25mm) 7075 aircraft grade aluminum and clear anodized. This chassis has been tested and tweaked to provide racers with a top notch chassis that will perform very well on all surfaces.
This chassis was developed to withstand the high wear characteristics of surfaces in the western states, up north and Canada - but works equally well in softer track conditions as well. This chassis will give you a much longer chassis life than stock, as you can replace the steel skid plates and be back to the same thickness as a new chassis.
It is important to note that the skid plates fit flush to the bottom of the chassis and will not effect the droop settings and cause you to scrub speed on the landings.
- Hardened droop screw stops to prevent chassis wear and droop changes.
- Longer tapered milled out area for the clutchbell to help prevent clutchbells from hitting the chassis during chassis flex.
- Milled out area for gas tank screws to help keep tanks from cracking.
- Hardened steel rear skid plate
- Weight 291 grams
Replacement skid plates:
- M2C8971 front
- M2C8972 rear plate
This product was added to our catalog on April 16, 2019