The Kyosho EP Jetstream 888VE ReadySet Brushless Boat is a serious offshore racer that features an auto-recovery from capsize function that maximizes play time by keeping the boat upright and racing along the waves. In the event of capsize; weight balance is changed by water entering the ballast room to right the hull to its normal posture and automatically drain out, allowing the boat to continue running. This design removes the stress and worry of losing your boat if it happens to flip over.
This kit includes the Kyosho Speed House TORX M4 brushless water-cooled motor and an upgraded 120A capacity KA120-91WC water-cooled waterproof brushless ESC for optimal power and performance. Hit maximum speed of approximately 60km/h with 14.8V 4-cell Li-Po battery (sold separately).
- Pre-colored FRP factory assembled hull reaches speeds of 60km/h.
- Pre-installed KYOSHO SPEED HOUSE TORX M4 brushless water-cooled motor (40x68mm, KV2000) generates excellent torque characteristics.
- Ballast compartments built into the sides of the hull that redistribute weight balance so the hull rights itself if capsized.
- Magnetic lock hatch open/closes without using any tools
- Built-in waterproof radio box with double-hatch protects R/C system components from water.
- Redesigned KYOSHO SPEED HOUSE KA120-91WC water-cooled, waterproof ESC
- Unsinkable self-righting structure.
- Flip-up rudder design prevents damage if boat contacts an obstacle.
- Equipped with combination turn fin and trim tab with adjustable angle.
- Features stopper to prevent loss of shaft.
- Includes drip proof rubber boots, aluminum servo mount, carbon nylon 3-blade propeller.
Weight: 1,780g (when 14.8V-4000mAh installed)
Motor: Pre-installed KYOSHO SPEED HOUSE TORX M4 Brushless water-cooled motor (40x68mm, KV2000)
Battery: 4 cell 14.8V 3600-4000mAh LiPO (Super Plug specification, sold separately)
Propeller: Carbon reinforced nylon D40 x P1.4 (3-blade)
ESC: Pre-installed Kyosho Speed House 120A KA120-91WC water-cooled, waterproof brushless ESC
- Pre-colored fully assembled hull
- Water-cooled brushless motor
- Water-cooled 120A ESC
- Rudder servo
- Boat stand
- Spare propeller
- Waterproof clear tape
- 2.4GHz Syncro KT-231P transmitter
Needed to Complete:
- (1) 4 cell 14.8V 3600-4000mAh LiPO battery w/T-Plug
- Compatible size: L138 x W46 x H33mm or less/L162 x W46 x H25mm or less
- Charger for LiPo battery
- (4) AA sized batteries for transmitter