HS-7245MH Hi-Voltage "Hi-Torque" Metal Gear Digital Mini Servo by Hitec

Check Store Availability
Please be aware that pricing and product availability in-store may vary from what’s available online because each store is independently owned and operated.
Hitec
HRC37245S
Low Price: $69.99
Add To Cart Add to Wish List
In Stock Online!
Usually ships in 24 hours

This is the Hitec HS-7245MH Hi-Voltage "Hi-Torque" Metal Gear Digital Mini Servo. The high voltage, coreless HS-7245MH servo delivers exceptional torque in a compact package. Built with an efficient coreless motor optimized for 7.4V operation and heavy-duty metal gear train with dual ball bearings, this high-end mini servo delivers unbridled performance. Whether you are flying mid-size gas and electric airplanes, 500-550 electric helis, or driving 1/12th scale on-road racers and 1/18th scale rock crawlers, the lightning speed of this servo will deliver the power your looking for.

Specifications:
Size Category: Minis and Micros
Type: Digital
Application: .40 to .60-sized glow and electric planes; 500-550 electric helis; 1/12 scale on-road and 1/18 scale rock crawlers
Torque: 72 oz-in (5.2 kg-cm) @ 6.0V; 89 oz-in (6.4 kg-cm) @ 7.4V
Speed: 0.13 sec/60° @ 6.0V; 0.11 sec/60° @ 7.4V
Length: 1.28 in (32.4mm)
Width: 0.66 in (16.8mm)
Height: 1.29 in (32.8mm)
Weight: 1.20 oz (34.0 g)
Bushing Or Bearing: Bearing
Bearing: Dual
Motor Type: Coreless
Connector Type: Universal
Gear Type: Metal
Voltage: 6.0V-7.4V

This product was added to our catalog on May 15, 2012.

Cory Chung
Verified Owner
Monday, Feb 5 2018 (4 months ago)
Hitec HS-7245MH Hi-Voltage "Hi-Torque" Metal Gear Digital Mini Servo
Bought this servo to use as a shift servo in my rig. I am pushing 7.5v to my steering servo and was a little tight on space, this servo works great. No external BEC needed. ESC I am using is a Mamba X with a 2850kv slate motor and 3s lipo.)
trexboy
Monday, Jul 28 2014 (about 3 years ago)
Hitec HS-7245MH Hi-Voltage "Hi-Torque" Metal Gear Digital Mini Servo
Watch out these servos will not fit a trex 500. The height is too deep ,you will have to put 4mm of shims between each servo and the frame to mount them, which then will put the linkage rods at a very sharp angle. And the length is way to short to match the mounting holes in the frame. You COULD make these work but it is a lot of trouble, better to stick to futaba 9650 or align 510.)