Hobbywing XRotor Micro F4 G3 Flight Controller w/OSD

Hobbywing XRotor Micro F4 G3 Flight Controller w/OSD
Price: $34.99
In Store Only
Check Store Availability
Please be aware that pricing and product availability in-store may vary from what’s available online because each store is independently owned and operated.
This item is only available for purchase exclusively from our retail stores. Click here to find a store near you. You may want to search our site for a similar item.
Hobbywing F4 G3 Flight Controller w/On-Screen Display.

Features:
  • STM32 F405 MCU.
  • Board load 12V BEC, the output current can reach 2A. It can supply power for graphic transmission, 12V LED lamp and other equipment
  • The SPI ICM-20602 which integrates accelerometer and gyro (with the running frequency can be set to 32KHz) is adopted
  • Onboard OSD microchip which supports the DMA mode allows users to adjust its parameters via the Betaflight software (Note: the OSD is controlled by the F4 MCU)
  • The FC which supports Betaflight firmware & allows parameter adjustment via Betaflight software is more applicable to FPV race
  • F-card which can record and save more flight/black box data allows users to adjust thesetup of their aircraft easily
  • Compatible with various receivers like SBUS, SUMH, SUMD, SPEKTRUM1024/2048, XBUS, PPM and etc
  • LED strip signal output port allows users to adjust the color & flash mode of the LED strip via the FC
  • Volt/Amp monitoring port allows users to check the battery voltage (BAT port) and current (CRT port , extra current meter is needed)
  • Buzzer output port allows users to connect external buzzer(s) to the FC for warning or informing the flight status of the aircraft
  • Micro USB port allows users to connect the FC to a PC to flash firmware and adjust parameters
  • Switch module of board load graphic transmission(VTX) can use remote contorl to control switch of graphic transmission
Specifications:
Firmware: OMNIBUSF4SD
FC Programming: supported
Programming via: Betaflight, Cleanflight-configurator
Compatible with (Modes): PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, DShot1200, Proshot1000 and etc
Compatible with (Transmitters): PPM, Spektrum, SBUS, SUMD, SUMH, XBUS, IBUS, JETIEXBUS, CRSF, SRXL, and etc.
OSD: Buit-in
Voltage Monitoring: Supported
Current Monitoring: Supported
External Buzzer: Supported
LED Control: Supported
USB Port: MicroUSB
Timing: Supported
Motor Rotation: Supported
Dimensions: 36x36mm
Weight: 6g

This product was added to our catalog on October 3, 2019