Hobbywing EZRun 18A Sensorless Brushless ESC/Motor Combo (12.0T/7800kV) w/Program Box

Hobbywing EZRun 18A Sensorless Brushless ESC/Motor Combo (12.0T/7800kV)
In Stock Online
Usually ships in 24 hours
$1.99 flat rate shipping! Learn More
Read Reviews
Write a Review
Check Store Availability
Please be aware that pricing and product availability in-store may vary from what’s available online because each store is independently owned and operated.

This is the Hobbywing EZRun 18A Sensorless Brushless ESC and Motor Combo, with an included Program Box. This combo combines an 18 Amp Brushless/Sensorless ESC with a 12.0 Turn, 7800kV Brushless/Sensorless Motor for an electronic package suitable for 1/18 and 1/16 scale on-road and off-road sport fun. 


  • Compatible with sensorless brushless motors.
  • High quality components, big current endurance.
  • Excellent start-up, acceleration and linearity features.
  • Plenty of programmable items, suitable for various of chassis's, tires and racing tracks.
  • Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection.
  • Internal timing can be changed easily to make the ESC suitable for various of motors.
  • Easily programmed with the SET button, LED Program Box, Multifunction LCD Program Box and USB Link Software.
  • ESC firmware can be updated through the USB adapter in the LCD Program Box.
  • Top quality motor:
    • Aluminum shell (case)
    • High quality magnets
    • Copper wires of high temperature endurance
    • Good quality bearings

ESC Specifications:
Continuous 18A, burst 50A.
Input: 4-9 cells NiMH/NiCd or 2-3S LiPo.
BEC: 6V/1A (Linear mode built-in BEC).
Resistance: 0.01 Ohm.
Motor Supported: Sensorless Brushless Motor.
Suitable Motor:

  • With 4-6 cells NiMH/NiCd or 2S Lipo: On-Road≥12T,  Off-Road≥8T;
  • With 6-9 cells NiMH/NiCd or 3S Lipo: On-Road≥18T,  Off-Road≥24T;

Suitable Car: 1/18 on-road sport.
Cooling Fan: Not included.
Size: 31.5mm(L) * 27.5mm(W) * 15mm(H).
Weight: 19g (Without wires)

Motor Specifications:
kV: 7800
Motor Diameter: 20mm
Motor Length: 30
Shaft Diameter: 2mm
Shaft Length: 10mm
Weight: 46g

Programmer Specifications:
Weight: 40g
Input Weight: 4.8-6V


  • EZRun 18A Brushless/Sensorless ESC
  • EZRun 2030 18.0T/5200kV Brushless/Sensorless Motor
  • LED Program Box
Verified Owner
Tuesday, Mar 22 2016 (about 4 years ago)
Hobbywing EZRun 18A Sensorless Brushless ESC/Motor Combo (12.0T/7800kV)
I have the same speed controll in my RC18T and it's being used with a Castle motor. I figured it seems to work well I should buy the combo and put it into my son's mini recon. I will save you the headaches now.... DO NOT BUY THIS EXPECTING TO USE NiMH batteries. You can get it to work after calibrating numerous times and messing around with the end points. However in the end you will still only have mediocre performance at best and then you will probably consider putting your brushed system back in. I have experienced the same thing with both of our trucks now and with this combo I even thought it was defective it was so slow on NIMH. DO YOURSELF A FAVOR AND USE LiPO WITH THIS COMBO or ESC. Once setup for lIpo it is a night and day difference. The esc is smooth and the power is plentiful for an 18th scale. (prefer it over my mamba 25 esc)
Monday, Jan 18 2021 (7 weeks ago)
Hobbywing EZRun 18A Sensorless Brushless ESC/Motor Combo (12.0T/7800kV)
Not to happy with this product...on the box it say it works with three cell lipos. Well in my case I don’t think it does because I plug it in to my reaciver plugged in my three cell Lipo and insintly her crackling noises from the motor. Gave it a little on the trigger and boom FIRE so less than three seconds of having this product it cought on fire.
Verified Owner
Tuesday, Sep 15 2020 (6 months ago)
Hobbywing EZRun 18A Sensorless Brushless ESC/Motor Combo (12.0T/7800kV)
fast little engine comes in a great combo giving you a programming card for most of EZRun ESC love it!