HK-4525-520 Ultimate Brushless Motor (36mm Shaft) by Scorpion
FREE Shipping Eligible!
This item is eligible for Super Saver Shipping Learn More
This product was added to our catalog on January 12, 2012.This is the Scorpion HK-4525-520 Ultimate Edition Brushless Motor. The Scorpion HK-45 series motor is designed for 700 class helicopters running on 12-cell Li-Po power*. This motor represents the most technologically advanced power source ever offered for a 700 class electric helicopter and also produces 20% more torque than the popular Scorpion HK4035 series motors and exceeds 89% efficiency. Each of the HK-4525-520KV Limited Edition motors are wound in a YY pattern with a single strand of 1.4mm wire for the highest possible efficiency. This motor is capable of running continuously at an input power of 4450 watts at 100 amps, and can handle peak inputs of 10200 watts and 230 amps for 2 seconds!
Scorpion Competition Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price. Scorpion starts with high quality aluminum alloy parts that are produced on the latest CNC milling machines. These parts are then gold anodized to provide a beautiful, long-lasting finish. The stators are made with 0.2mm laminations to give maximum efficiency, and minimum Eddy current losses. The stators are epoxy coated to prevent shorts, and are wound with wire that is rated at 180 degrees C (356 F). The magnets used in Scorpion Motors are rated for operation at 200 degrees C (392 F), making a motor that is virtually impossible to burn up in normal use.
Scorpion Motors are built to last, and are backed with a 2-Year warranty against defects in materials or workmanship. However, due to the high RPM of these motors, and the fact that Scorpion cannot control the installation and setup, the bearings are not covered by the 2-Year warranty, nor is any subsequent damage caused to the motor by a bearing failure. Bearings are a normal wear item, and as such, need to be maintained and changed periodically. For maximum life, make sure that a sufficient gap is left between the pinion and main gear during motor installation to avoid binding, and put a small drop of oil on each bearing every 5-6 flights. It is the responsibility of the pilot to ensure that the bearings are maintained properly. For the best overall combination of quality, performance, and value, use Scorpion Motors in your helicopter!
*NOTE: This motor uses 30mm bolt spacing for mounting, with M4 Screw holes.
Stator Diameter: 45mm (1.77")
Stator Thickness: 25mm (0.98")
No. of Stator Arms: 12
No. of Stator Poles: 10
Motor Wind: 5+6T YY
Motor Wire: 1-Strand 1.4 mm
Motor Kv: 520KV RPM/Volt
No-Load Current (Io/10V): 1.75 Amps
Motor Resistance (RM): 0.012 Ohms
Max Continuous Current: 100 Amps
Max Continuous Power: 4450 Watts
Weight: 503 Grams (17.74 oz)
Outside Diameter: 56.7mm (2.23")
Shaft Diameter: 5.98mm (0.24")
Body Length: 53.4mm (2.10")
Overall Shaft Length: 91.5mm (3.60")
Max Lipo Cell: 12s
Max Peak Current: 230A (2 seconds)
Max Peak Power: 10200 Watts (2 seconds)
Motor Timing: 5 deg to 15 deg
Drive Frequency: 8kHz