HK-3014 Brushless Motor (650W, 900Kv) by Scorpion
This product was added to our catalog on January 19, 2015.
This is the Scorpion HK-3014, 900kV Brushless Motor. The Scorpion HK-3014-900 was developed specifically for the SAB Goblin 380, to provide long flight times and the power that you need for 3D performance while still maintaining excellent efficiency and cool running characteristics. Scorpion HK-30 Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price.
Scorpion starts with high quality aluminum alloy parts that are produced on the latest CNC milling machines. These parts are then gold anodized to provide a beautiful, long-lasting finish. The stators are made with 0.2mm laminations to give maximum efficiency, and minimum Eddy current losses. The stators are epoxy coated to prevent shorts, and are wound with wire that is rated at 180 degrees C (356 F). The magnets used in Scorpion Motors are custom manufactured to be able to with stand high temperatures, making a motor that is virtually impossible to burn up in normal use. Package includes factory installed 4.0mm male bullet style connectors, as well as a hardware package that contains 3 matching female Bullet connectors for your speed controller and matching heat shrink tubing. For maximum strength, motors feature an 5 mm diameter at the output shaft to fit standard size pinion gears.
Scorpion Motors are built to last, and are backed with a 2-Year warranty against defects in materials or workmanship. However, due to the high RPM of these motors, and the fact that Scorpion cannot control the installation and setup, the bearings are not covered by the 2-Year warranty, nor is any subsequent damage caused to the motor by a bearing failure. Bearings are a normal wear item, and as such, need to be maintained and changed periodically. For maximum life, make sure that a sufficient gap is left between the pinion and main gear during motor installation to avoid binding, and put a small drop of oil on each bearing every 5-6 flights. It is the responsibility of the pilot to ensure that the bearings are maintained properly.
For the best overall combination of quality, performance, and value, put a Scorpion Motor in your machine!
Stator Diameter: 30.0 mm (1.181 in)
Stator Thickness: 14.0 mm (0.551 in)
Number of Stator Slots: 12
Number of Magnet Poles: 10
Motor Wind: 11-Turn Delta
Motor Wire: 7-Strand 0.25 mm
Motor Kv Value: 900 RPM per Volt
No Load Current (Io): 1.09 Amps @ 10 Volts
Motor Resistance (Rm) per Phase: 0.065 Ohms
Maximum Continuous Current: 28 Amps
Max Continuous Power (8-cell Li-Po): 650 Watts
Motor Weight: 119 grams (4.19 oz.)
Outside Diameter: 37.5 mm (1.476 in.)
Shaft Diameter: 4.98 mm (0.196 in.)
Motor Body Length: 34.5 mm (1.358 in.)
Overall Shaft Length: 57.5 mm (2.2440 in.)
Max Li-Po Cell: 6s
Peak Current: 43 Amps (2 seconds)
Peak Continuous Power: 1,000 Watts (2 seconds)
Motor Timing: 5 to 15 degrees
Drive Frequency: 8 KHz
- (1) Scorpion HK-3014-900KV 5mm shaft motor
- (3) Female Connectors
- (3) Heat Shrink
- (4) M3*0.5 Screws