The HS-765HB sail arm servo has up to 140 degrees of travel and comes with a Heavy Duty 4.5 inch arm. With its dual ball bearing supported output shaft the HS-765HB will provide years of reliable service for your R/C sailing applications to 2 meters.
Key Features:
- Up to 140 degrees of travel
- 4.5 inch arm
- Dual Ball Bearing Supported Output Shaft
- *** Warning: Do not use thread lockers on Karbonite geared servo as it will cause the output shaft to fail
Specifications:
- Size Category: Specialty
- Type: Analog
- Application: Sailing
- Torque: 153 oz-in (11.0kg-cm) @ 4.8V; 183 oz-in (13.2kg-cm) @ 6V
- Speed: 0.28 sec/60 deg @ 4.8V; 0.23 sec/60 deg @ 6V, at no load
- Length: 2.32 in (59.0mm)
- Width: 1.14 in (29.0mm)
- Height: 1.97 in (50.0mm)
- Weight: 3.88 oz (110g)
- Bushing Or Bearing: Bearing
- Bearing: Dual
- Motor Type: 3 Pole
- Connector Type: Universal
- Gear Material: Karbonite
- Current Draw Idle: 8mA
- Current Draw Stall: 1500mA @ 4.8V; 1800mA @ 6V
- Voltage: 4.8V to 6.0V
- Deadband: 5µs
This product was added to our catalog on July 2, 2020
