HD Center Driveshaft (SCTE - Front/SCTE 2.0 - Rear) by Tekno RC
This is an optional Tekno RC HD Center Driveshaft, intended for use with the Losi TEN-SCTE Series.
This driveshaft is used in:
- Front/Center on TEN-SCTE
- Rear/Center on TEN-SCTE 2.0
One of the main weaknesses of the Losi SCTE, is the center driveshaft. The extreme angle and cheap stock material causes the barrel and pins to wear prematurely. Worse yet is when the pins eject while you're halfway through your main event! Tekno has engineered a set of center driveshafts and diff couplers based on the bombproof M6 driveshaft design. Using only the finest materials and hardening methods, they have developed a driveshaft that will last at least twice as long as the stock units! The best part is the race proven snap ring concept that retains the drive pin. Drive with confidence knowing that your pin is secure and moving freely and efficiently. Start saving money and eliminate the hassle of the stock replacements and step up to the best product available!
- Stronger, last longer and require less maintenance than stock driveshaft
- Snapring retains the pin, it will never eject again
- Super light design
- All hardened steel construction
- Massive M5 set screw, prevents stripping out
- Completely rebuildable
- Track tested
This product was added to our catalog on April 11, 2012.
I threw pin 2 times begore finding these i now have front and rear and have not had any problems for over 6 months