Gens Ace is one of the top rank battery corporations with deep research and manufacturing on NIMH, LI-PO, LI-FE by the effort of 200 professional engineers and technicians with 20 years exquisite battery technology. The Gens Ace brand holds the traditional concept of "excellent quality", "Optimization"& "Priority" on Sales & Services. All batteries are tailored for various scales of the RC Models such as electronic cars, nitro cars, aero planes, vessels and also other models, toys, electric tools, electric bikes, electric autos, digital products etc.
- High discharge rate enables single cell capacities of 7500mAh.
- Small in size and light in weight
- Superior Japan and Korea Lithium Polymer raw materials.
Minimum Capacity: 7500mAh
Configuration: 4S1P / 15.2V / 4Cells
Discharge Rate: 100C
Max Burst discharge Rate: 200C
Net Weight(±20g): 578g
Dimensions: 139mm Length x 47mm Width x 48.5mm Height
Discharge Plug: 5.0mm bullet to Deans
This product was added to our catalog on July 11, 2018
only about 40g heavier but get 1000mah more compared to the others listed.
case seems like it might be weak as it got beat up quickly(bottom has dents in it and one the sides is scratched up after first run).
the information on a sticker is upside down(dose not affect performance just found it odd)
dose not discharge evenly across all 4 cells.(could be because was my first run)
long run times(30-40+mins on castle mamba x esc(stock but high start power) and castle 2200kv with 19t pinion 44t spur
stays nice and cold under 100f on a day thats 60 outside
5mm bullet end is not connected to sense wire so less wire in the car
sense wire port on the battery has a rubber cover that keeps dirt and mud out
sense wire is nice and long(4") so not a pain to plug into your charger like some the shorter sense wires are
looks and feels high quality
I have smaller batteries for regular condition I just used this one for this event knowing that I was not going to have time to change pack in between qualifier's.
The pack provided consistent power all the way, I have not ran it to the cut off yet.