FVT Littlebee 30A BLHeli_S ESC by RaceTek
This product was added to our catalog on December 7, 2016.Manufactured by FVT, the Littlebee 30A BLHeli_S ESC supports supports Multishot, OneShot125 and Oneshot42. It also supports BLHeli_S firmware providing unparalleled performance for it's size. Designed by FPV enthusiasts, for FPV enthusiasts, the Littlebee is one of the top contenders available in today's market. Equipped with Silabs F390 processors, and high speed dedicated gate drivers, these hardware components allow for exceptional freewheeling and phenomenal braking abilities in flight.
The Littlebee is an Opto ESC, which will require an alternate power source to power your flight controller. A list of preferred Power Distribution Boards can be found below:
Additionally it is recommended to install a voltage step-down or filter for your video equipment such as your video transmitter and FPV camera. AMain recommends a LC Filter to help prevent voltage spikes damaging the video equipment.
NOTE: The PCB color can arrive in black or red depending on the batch during manufacturing. Only the color is different, no other components are affected.
- BLHeli_S Firmware
- Multishot support
- OneShot 125 Support
- OneShot 42 Support
- Damped Light Support
- Flexible Programming Connections
- Works with DYS USB Linker (DYSUSBLV2)
Input Voltage: 2-6 cells, 2S-4S LiPo
Constant Current: 30 Amps
Burst Current: 40 Amps
Weight: 12g w/ wires, 4.5g bare board (wires removed)
Dimensions: 25x12.5x3mm (board dimensions only)
Motor Wire: 60mm length, 18awg
Battery Wire: 90mm length, 18awg