Flite Test Power Pack G V2

Read Reviews
Write a Review
Flite Test Power Pack G V2
Price: $104.99
In Store Only
This item is only available for purchase exclusively from our retail stores. Click here to find a store near you. You may want to search our site for a similar item.
Check Store Availability
Please be aware that pricing and product availability in-store may vary from what’s available online because each store is independently owned and operated.
The Flite Test Power Pack G has been updated for 2019 and forward! Featuring incredibly powerful yet reliable 1104-5250kV Brushless Motors, F3 Flight Controller, and a 4-in-1 6A ESC, this Gremlin package is the ideal choice for any Gremlin airframe, or similar sized air frame that can swing up to 3" props. 


  • (1) Full Speed RC Baby Flight Tower (FLT-3055)
    • (1) Flight Controller
    • (1) 6a 4-in-1 ESC
  • (4) Flite Test Gremlin 1104-5250kV Brushless Motors (FLT-3027)
  • (3 Sets) EMAX Tri-Blade Avan Micro 2.3" Props
  • (1)Flite Test 1.5mm Hex Driver
  • (1) Flite Test Gremlin Decal

This product was added to our catalog on January 31, 2019

Verified Owner
Saturday, May 18 2019 (about 3 years ago)
Flite Test Power Pack G V2
I recently ordered the parts for a new FT Gremlin drone, including the frame and the Power Pack G V2. Upon receiving the parts I attempted to assemble the drone according to the assembly video on YouTube. Unfortunately, the assembly video used the Power Pack G original (not V2) so when I went to assemble my drone with the Power Pack G V2 I ran into some major obstacles. The motors would not screw into the frame, there was little to no documentation on how to wire the electronics, and the firmware I was told to use in the video did not work. I had to spend hours modifying the frame and ended up frying the ESC twice due to inadequate documentation.

(Especially if you're a noob) beware before you buy this for the FT Gremlin since it is not compatible with the existing frame and instructional video. Please update your documentation Flite Test!
Verified Owner
Thursday, Jul 18 2019 (about 2 years ago)
Flite Test Power Pack G V2
I was reluctant at first because I could'nt find any vidios or blogs on the new power pack but as long as you realise its omnibus not a sp racing Flight Controller.The power pack G v2 is very strait forward to setup and get flying.
I did have to dig pretty hard to find pin outs to be sure where to hook up. I bought the dead cat frame to go with it a little disapointed that FC mounting holds were for a larger stack but a little drilling fixed that.Over all very happy.
Verified Owner
Wednesday, Aug 7 2019 (about 2 years ago)
Flite Test Power Pack G V2
As of 8/7/19
Ok so here is a review of the FT gremlin kit with power pack G(v2)and Adres Lu chassis as sold in the FT store as of july 2019.

Firstly the the FT Gremlin build video is for version 1, so its interesting but not totally applicable.
the (v2)motors the kit is supplied with do not have the same mounting hole spacing. the motor holes are wider by a smidge, maybe a millimeter, just enough the screws won't align. So you'll have to drill/carve out the mounting holes in the chassis slightly.(I did this by putting the same size drill bit in the drillpress and gently carved out the holes into slots)
the center holes for the motor driveshaft were slightly tight also and had to be champherd/de-burred, because the c-clip was binding in the hole.
the chassis is not drilled for the mounting posts of the Flight Controller(FC) tower(use the metal screws to mount the posts from the bottom of the chassis, the plastic ones go on top). A punchset/awl or nail will work nicely to mark the holes for drilling. the delrin plastic is pretty tough so if the holes aren't perfect don't worry just stretch them into slots. In short the chassis and and PPackv2 are not compatible right out the box, but its not a huge problem with some fiddling.

Secondly the FC the kit is supplied with is the *Full speed 16x16mm FSD-Baby F3 Tower 2S* (2S only works with 2cell Lipo).
Basically there is very little info on this FC online, no manual, no wiring pinout, nada. https://www.rcgroups.com/forums/showthread.php?3020780-Question-about-the-pinout-of-the-FSD-Baby-F3-Tower this pic is closest to a pinout but really doesn't tell you anything...
by the way RX1 is UART1, that should help with wiring and with betaflight :) (https://github.com/betaflight/betaflight-configurator)the chip comes flashed with beteflight and supports Dshot600.

Thirdly(is that a word?)with the new tower style FC there is very little room under the top plate of the chassis to samitch in a receiver, so the flysky X6B just barely fits, pretty much just jammed under there.(the X6B is 5volt)
as far a the electronics go i wouldn't have been able to figure it out without youtubers bluefalcon and joshua bardwell

in conclusion(TL/DR): the Gremlin kit as of this review is not plug and play out the box and requires several hours of fiddling to get it together. Now that its done and running we are pretty happy with it and it flies well. i hope the tips/issues above help to get yours together quick and easy.
Verified Owner
Friday, Aug 23 2019 (about 2 years ago)
Flite Test Power Pack G V2
The documentation is very lacking for this kit. I smoked my ESC... If you want to build the Gremlin from the video instead of the V2 power pack you will need the following in addition to all the other parts. This list ONLY builds the power pack
4 X https://store.flitetest.com/emax-rsii-1106-micro-brushless-motors-6000kv-emx-rsii-1106-6000/p801045
4 X https://store.flitetest.com/emax-bullet-series-6a-dshot-esc-w-blheli-s-emx-sc-1770/p591182
1 X https://store.flitetest.com/emax-femto-f3-flight-controller-babyhawk-emx-ac-1926/p737523
At least 1 X https://store.flitetest.com/emax-avan-micro-2-quad-blade-prop-clear-12-emx-avan-microclr/p740589
Verified Owner
Saturday, May 30 2020 (about 2 years ago)
Flite Test Power Pack G V2
An easy way to describe this product is you get what you pay for. Keep in mind this is for 2s batteries only (small in my opinion so I would get the turbo set that also comes with beefier motors and a stronger ESC that can run 3s.) If you are new to soldering Flite Test sells a cheap battery powered iron. DO NOT BUY IT. Buy the TS-100 that is what I now use after I bought the cheap iron and it makes soldering a breeze. Don't just take it from me ask anyone who buys this iron (make sure you buy a set that comes with the cables and solder). I did purchase the flux from Flite test which I use to clean my tip. This power pack is not lacking power if you are flying a 2s with a light camera. The reason why I deducted one star is because it was very difficult to solder as a beginner. Granted it could be because of the first iron I was using. It was very frustrating the first go around because I fried my quad when I turned on one of the motors but customer service sent me a whole new pack with everything included. Also please switch out your props if they are very nicked, your motors will thank you. If you have any questions e-mail me at [email protected]
Verified Owner
Thursday, May 7 2020 (about 2 years ago)
Flite Test Power Pack G V2
Buyer beware. I have 20+ years soldering experience and managed to fry the ESC. I think it was a bad motor, but I haven't had time to mess with it. There is NO documentation on the flight controller but it's reasonably easy to figure out if you have experience building drones. This is NOT a first drone project. I ended up using an old esc and one of the motors in a free-flight Dumas Corsair that was sitting around...pretty expensive power pack for that but oh well. The rest of the power pack is currently a paperweight.
Verified Owner
Tuesday, Apr 28 2020 (about 2 years ago)
Flite Test Power Pack G V2
Absolute garbage. Do not buy. The flight controller and esc are crap and not what was used in the build video.