EZ-Peak 3S "Completer Pack" Dual Multi-Chemistry Battery Charger by Traxxas w/Two Power Cell Batteries (5000mAh)
This product was added to our catalog on January 13, 2016.
This is the Traxxas EZ-Peak Dual Multi-Chemistry Battery Charger System with two included "Power Cell" Batteries. This charging system uses the Traxxas iD Battery Identification and is a great solution if you need batteries and a charger for a Traxxas vehicle requiring two 3S LiPo batteries; such as the X-MAXX Monster Truck and X0-1 Supercar. Even if your Traxxas vehicle requires only one battery, you can still take advantage of this system and have two batteries for use.
With iD Auto-Battery Identification thereís no need to worry about the battery chemistry or capacity. EZ-Peak Dual identifies the type of battery and its capacity. EZ-Peak Dual also cuts down on wasted time by eliminating the hassle of programming and using complicated setups. Just plug an iD battery in and press Start. Thatís it! Keeping with the simplicity and ease of use, the iD system eliminates fragile balance wires and clunky balance leads. The iD system streamlines the entire charging experience.
Traxxas' Most Powerful Charger
Faster charging means you get to spend more time behind the wheel. The EZ-Peak Dual puts out a full 100 watts of power that equates to 8-amps of charging horsepower. Itís a twin turbo-equipped charger. Traxxas iD LiPos (4000mAh or higher) charge nearly 2x faster in High Output Mode. The EZ-Peak Dual isnít just for iD LiPos; the Multi-Chemistry nature of the charger means LiPos and NiMHs can be charged at the same time. Advanced Mode opens the door for backwards compatibility. This allows EZ-Peak Dual to charge any Traxxas Power Cell battery equipped with a first-generation Traxxas High-Current Connectors and Traxxas iD batteries independently or simultaneously. There are two balance ports built into the charger for Traxxas LiPo batteries equipped with external balance leads. Take full advantage of the 8-amp output and experience the pinnacle of charger flexibility and power.
TRA2972 Charger Specifications:
AC Input: 100Ė240 Volts
Charge Current Range: 1.0-4.0A (Dual Mode) or 5.0-8.0A (High Output Mode) (100W Max.)
Discharge Current Range: 500mAh
Current Drain For Balance Ports: 500mAh
NiMH Battery Cell Count: 5Ė8 Cells
LiPo Cell Count: 2Ė3 Cells
Net Weight: 575g
TRA2872X Battery Specifications:
Total Capacity: 5000
Continuous Discharge: 25C (125A)
Max Burst Rate: 50C (250A)
Watt Hours: 55.5
Charge Rate: 1C (5A)
Max Charge Rate: 2C (10A)
Weight: 13.3oz (376g)