EzOSD On Screen Display System w/GPS by ImmersionRC
This product was added to our catalog on May 20, 2015.
This is the ImmersionRC EzOSD On Screen Display System with GPS. The EzOSD is a plug-and-play OSD. Tight integration with the EzUHF long range uplink via a digital bus gives the pilot access to a rich set of telemetry data, making the EzOSD a favorite among serious FPV pilots.
FPV is coming of age, and its time for FPV equipment to come of age also. The EzOSD was created by FPVers with hundreds of hours of experience, after listening to the wishes of countless ‘Newbies’, and experienced pilots alike.
Simple 'EZ' Setup
Who wants to spent hours in front of a PC, or wading through a manual, to setup an OSD. The EzOSD’s on-screen menu system is integrated, and accessed using three simple buttons. No need to hook up, and configure a R/C transmitter/receiver to access the setup menus!
Live Sensor Data
The EzOSD module offers navigation and basic voltage measuring capabilities, and can be used as a stand-alone device. For fuel powered models, this is usually all that is required for safe FPV flight. But the EzOSD includes a 100A current sensor that records instantaneous current consumption, as well as the battery level, precisely recording the number of mAh consumed. Don’t be fooled by the cheap imitations that claim a current sensor is not required!
All sensor data and GPS model position is sent down a telemetry link 10 times a second. The EzAntennaTracker displays this, and steers a directional antenna to always point to your model. The free ‘Immersion Player’ requires a simple audio connection to your PC’s microphone input to show the aircraft's position, live, on a Google-Earth Map.
Safety & Reliability
Its not hard to exceed your regions legal maximum altitude allowed for FPV or any other type of flying. So the EzOSD allows you to setup the parameters to warn you when these selected parameters are exceeded. Support is also provided to comply with Amateur radio callsign broadcast requirements, allowing the EzOSD to automatically broadcast your callsign periodically.
- Crisp, readable display, in any lighting conditions
- Telemetry link to a groundstation, or Smart-Phone app (iTelemetryFPV)
- Full compatibility with the EzUHF uplink (digital connection)
- Simple to setup, 3 buttons on the OSD itself
- USB port for future upgrades
Power Requirements: 2s-6s LiPo (6v – 25v)
Power Consumption: ~100mA