Exclusive RC HPI Venture Working Mirrors (Carbon Nylon)
Exclusive RC HPI Venture Side Mirrors feature super scale looks, with functional marker lights. These mirrors add the detail your Venture FJ deserves, and they are easy to install. Use the stock backing plate as a template, drill a 1/8" hole in the backing plate, centered between the two factory holes, to route the wire through. Mark the hole on the body and drill the hole, use the stock hardware to secure the mirror to the body. The LED lights include a built in resistor that will allow it to be powered from a 6.0V to 12V power source.
This is printed in carbon nylon filament. Carbon nylon creates stronger parts with finer detail than PLA filament. Plus, carbon nylon sands better and is easier to paint, so you can add more details if you choose.
NOTE: With most 3D printed items, some light finish work may be needed to remove excess material. Simply use a sharp hobby knife to carefully remove small strings and straggler layer lines as needed.
This product was added to our catalog on March 20, 2018