Ideal for 3D models 6–9 oz (170–255 g) and sport and scale models 8–12 oz (225–340 g).
Features
- Ideal for 3D models 6–9 oz (170–255 g) and sport and scale models 8–12 oz (225–340 g)
- External rotor design with 3.2mm shaft
- Integrated prop saver design
- Low noise level
- Mount, prop adapter and hardware included
- Ideal for models requiring up to 85 watts of power
- High-torque, direct-drive alternative to inrunner brushless motors
Specifications
Outer Diameter | 1.1 in (28mm) |
Bushing Or Bearing | Bearing |
Voltage | 7.2–11.1V |
Resistance | .33 ohms |
Shaft Diameter | 3.17mm (1/8 in) |
Idle Current (Io) | .40A @ 8V |
Connector Type | 2mm Bullet |
Recommended Prop Range | 6x5 to 8x3.8 (3-cells) or up to 10x3.8 (2-cells) - Slow Flyer |
RPM/Volt (Kv) | 1380 |
Motor Design | Outrunner |
Motor Type | Brushless |
This product was added to our catalog on December 20, 2007